홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Thionyl Chloride → 2,3,4,5-Tetrafluorobenzoyl chloride

HRID 2959
인쇄

반응식

HRID 2959 반응식
[F:1][C:2]1[C:10]([F:11])=[C:9]([F:12])[C:8]([F:13])=[CH:7][C:3]=1[C:4](O)=[O:5].S(Cl)([Cl:16])=O>CN(C)C=O>[F:1][C:2]1[C:10]([F:11])=[C:9]([F:12])[C:8]([F:13])=[CH:7][C:3]=1[C:4]([Cl:16])=[O:5]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 24386Thionyl ChlorideHCID 2975492,3,4,5-Tetrafluorobenzoic acid

생성물 1

HCID 27336892,3,4,5-Tetrafluorobenzoyl chloride

시약·촉매·용매 1

HCID 6228Dimethylformamide용매

반응 조건

온도
40 °C

실험 절차

A suspension of 200 g of 2,3,4,5-tetrafluorobenzoic acid, 225 ml of thionyl chloride and 5 ml of N,N-dimethylformamide, prepared at 20° C., is heated at reflux for 3 hours. After cooling at 40° C., the thionyl chloride in excess is evaporated off under vacuum. The residue is taken up with toluene and the solution is concentrated again at 40° C. under vacuum. Thus 219 g of raw 2,3,4,5-tetrafluorobenzoyl chloride are obtained as a yellowish oil. A mixture of 1200 ml of toluene, 220 g of diethyl malonate and 153 g of magnesium ethylate, prepared at 20° C., is heated one hour at reflux, then it is cooled to 5° C. and the acid chloride above obtained is added thereto, by keeping the temperature below 10° C. After a 30-minutes stirring, the mixture is made acid with concentrated hydrochloric acid and the two phases are separated. The organic phase is diluted with water, made acid with sulfuric acid to pH 1.0 and heated at reflux for 7 hours, namely until the reaction is over. The mixture is cooled, the aqueous phase is separated and the organic one is taken up with water and made basic with sodium hydroxide to a very basic pH value. The aqueous phase is separated and the organic one is again extracted with water. The combined aqueous phases are made acid with concentrated hyarochloric acid to pH 1 and extracted twice with toluene. The toluene phase is concentrated under vacuum, the residue is taken up with 1250 ml of acetonitrile. To this mixture, at first 80 g of sodium bicarbonate and then 110 ml of N-methylpiperazine are added and the reaction mixture is heated 3 hours at reflux. By dilution with water the desired product precipitates and it is then filtered and washed with water. The wet product thus obtained is suspended in toluene and the suspension is evaporated by distillation until the solution becomes anhydrous. This solution contains 0.89 mole of ethyl 2,3,5-trifluoro-4-(4-methylpiperazin-1-yl)benzoylacetate and is directly used for the subsequent step (b).

후처리

  1. customprepared at 20° C.
  2. temperatureis heated
  3. temperatureat reflux for 3 hours
  4. customthe thionyl chloride in excess is evaporated off under vacuum
  5. concentrationthe solution is concentrated again at 40° C. under vacuum

출처 및 근거

ORD 기록
ord-b86839ffe9b04ba9843462354aa0bc38
출처 데이터셋
uspto-grants-1998_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05731433

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트