홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Benzylethanolamine → 4-Benzylmorpholine-2-carboxylic acid hydrochloride

HRID 30313
노트
인쇄 미리보기

반응식

HRID 30313 반응식
[Cl:1][C:2](=[CH2:5])C#N.[CH2:6]([NH:13][CH2:14][CH2:15][OH:16])[C:7]1[CH:12]=[CH:11][CH:10]=[CH:9][CH:8]=1.C[C:18](C)([O-:20])C.[K+].C1C[O:26]CC1>C1(C)C=CC=CC=1>[ClH:1].[CH2:6]([N:13]1[CH2:5][CH2:2][O:16][CH:15]([C:18]([OH:20])=[O:26])[CH2:14]1)[C:7]1[CH:12]=[CH:11][CH:10]=[CH:9][CH:8]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 4348BenzylethanolamineHCID 8028TetrahydrofuranHCID 701982-ChloroacrylonitrileHCID 23665647Potassium tert-butoxide

생성물 1

HCID 27763524-Benzylmorpholine-2-carboxylic acid hydrochloride수율 61%

시약·촉매·용매 1

HCID 1140Toluene용매2회

실험 절차

A 500 mL reactor under N2 is successively loaded with toluene (36.72 mL) and 2-chloroacrylonitrile (10.7 g, 122.23 mmol) at room temperature. Then, N-benzyl ethanolamine (18.36 g, 121.14 mmol) is added over 5 min and the reaction mixture is post-agitated at room temperature for 16 h. Then, the mixture is diluted with toluene (110.16 mL), cooled to −5° C. and 2M potassium tert-butoxide solution in THF (121.14 mmol) is slowly added over 30 min, maintaining the temperature at −5° C. to 0° C. The mixture is post-agitated at about −5° C. to 0° C. for 1 h, then quenched by adding water (45.9 mL). The aqueous layer is separated and the toluene layer is washed with water (45.9 mL) and then the mixture is allowed to warm to room temperature. The organic layer is then concentrated under reduced pressure at 40° C. Then, the mixture is diluted with toluene (100 mL) and extracted with 6N HClaq (162 mL). This aqueous layer is heated up to the reflux for 1 h 30, then the mixture is allowed to stir at room temperature overnight. After crystallization of 91, the solid is filtered, rinsed with 6N HClaq (40 mL) and dried under reduce pressure at 40° C. (19 g, yield=61%).

후처리

  1. temperaturecooled to −5° C.
  2. temperaturemaintaining the temperature at −5° C. to 0° C
  3. stirringThe mixture is post-agitated at about −5° C. to 0° C. for 1 h
  4. customquenched
  5. additionby adding water (45.9 mL)
  6. customThe aqueous layer is separated
  7. washthe toluene layer is washed with water (45.9 mL)
  8. temperatureto warm to room temperature
  9. concentrationThe organic layer is then concentrated under reduced pressure at 40° C
  10. additionThen, the mixture is diluted with toluene (100 mL)
  11. extractionextracted with 6N HClaq (162 mL)
  12. temperatureThis aqueous layer is heated up to the
  13. temperaturereflux for 1 h 30
  14. stirringto stir at room temperature overnight
  15. customAfter crystallization of 91
  16. filtrationthe solid is filtered
  17. washrinsed with 6N HClaq (40 mL)
  18. customdried
  19. customat 40° C.

출처 및 근거

ORD 기록
ord-54fa4ad3018b43109b1c48ab5b1d7e67
출처 데이터셋
uspto-grants-2008_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07423037B2

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트