참여 물질
| 역할 | 이름 | HCID | 투입량 |
|---|
| 반응물 | Hydrochloric Acid | HCID 313 | — |
| 반응물 | 3,5-Dimethylaniline | HCID 7949 | — |
| 반응물 | Sodium Nitrite | HCID 23668193 | — |
| 촉매 | Cuprous chloride | HCID 62652 | — |
| 용매 | Water | HCID 962 | — |
| 생성물 | 3,5-Dimethylchlorobenzene | HCID 32887 | — |
반응 단계
A total of 33.0 g of 3,5-dimethylaniline was added dropwise over 20 minutes to 200 ml of concentrated hydrochloric acid at such a rate that the temperature of the reaction was kept below 35° C. After several minutes of vigorous stirring, the reaction was cooled to -10° C. A solution of 19.7 g of sodium nitrite dissolved in 50 ml of water was added dropwise over 30 minutes at such a rate that the reaction temperature was kept between -12° C. to -16° C. Then, 3.0 g of copper (I) chloride was added and the reaction was warmed to 27° C. At this temperature foaming was noted and the reaction temperature was maintained below 35° C. with an ice water bath. After one hour, the reaction was poured onto 350 g of ice. Once the ice melted the crude product was extracted with 400 ml of hexanes, the organic phase was dried with magnesium sulfate, filtered, and concentrated to yield 20.2 g of a liquid. This material was diluted with 5 ml of hexanes and chromatographed on neutral alumina (Brockman 1, 150 mesh), eluting with 1200 ml of hexanes and collecting 200 ml fractions. The desired 95% pure intermediate, 10.1 g, was isolated cleanly in fractions 1 and 2.
출처 및 근거
| DOI | 10.6084/m9.figshare.5104873.v1 |
|---|
| 특허 번호 | US05272128 |
|---|
| 출처 데이터셋 | uspto-grants-1993_12 |
|---|
| ORD ID | ord-250b93718ac24c5296f505d39c386af2 |
|---|
| 출처 메모 | uspto-grants-1993_12 |
|---|