홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Benzene → p-Divinylbenzene

HRID 327755
인쇄

반응식

HRID 327755 반응식
C1C=CC=CC=1.C([Li])CCC.[CH:12]([C:14]1[CH:19]=[CH:18][C:17]([CH:20]=[CH2:21])=[CH:16][CH:15]=1)=[CH2:13].C1C=CC=CC=1>CCCCCC>[CH:12]([C:14]1[CH:19]=[CH:18][C:17]([CH:20]=[CH2:21])=[CH:16][CH:15]=1)=[CH2:13]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 241BenzeneHCID 86746530p-Divinylbenzene benzeneHCID 178418339Butyllithium

생성물 1

HCID 66041p-Divinylbenzene

시약·촉매·용매 1

HCID 8058Hexane용매

실험 절차

Simultaneously, the p-divinylbenzene is distilled from dibutylmagnesium into a clean, flamed and purged valved burette and then diluted by vacuum distillation of 2 times its volume of dry benzene from the stock benzene with n-butyllithium. Next, a clean, flamed and purged, 3-neck, 300 mL reactor flask is fitted with a magnetic stirrer and rubber septum separated from the flask by an in-line, straight-through- bore teflon valve. The burette containing the p-divinylbenzene and benzene is padded with dry argon from the vacuum/argon manifold, the valve is closed and the burette is transferred to the 300 mL reactor flask which is subsequently evacuated and filled with argon several times. Then, about 100 mL benzene is distilled into the reactor flask from the stock benzene/n-butyllithium solution. To the dry benzene in the reactor flask, 0.5 mmoles (0.5 mL of 1.0M solution) of n-butyllithium in hexane is added via gas-tight syringe through the rubber septum and straight-bore valve. After stirring, the reactor flask is cooled to -400° C. and 0.32 mL of the p-divinylbenzene/benzene solution is added dropwise from the burette to give a ratio of p-divinylbenzene to Li+ of 1.5 which produces the micro-particle with the living lithium carbanion initiation sites as indicated by the red-orange color.

후처리

  1. distillationSimultaneously, the p-divinylbenzene is distilled from dibutylmagnesium into a clean,
  2. temperatureflamed
  3. custompurged
  4. additiondiluted by vacuum distillation of 2 times its volume of dry benzene from the stock benzene with n-butyllithium
  5. temperatureNext, a clean, flamed
  6. custompurged
  7. custom3-neck, 300 mL reactor flask is fitted with a magnetic stirrer
  8. customrubber septum separated from the flask by an in-line, straight-through- bore teflon valve
  9. additionThe burette containing the p-divinylbenzene and benzene
  10. customthe valve is closed
  11. customis subsequently evacuated
  12. additionfilled with argon several times
  13. distillationThen, about 100 mL benzene is distilled into the reactor flask from the stock benzene/n-butyllithium solution
  14. temperaturethe reactor flask is cooled to -400° C.

출처 및 근거

ORD 기록
ord-8fe10d2e0d864126b641c347995ae0fe
출처 데이터셋
uspto-grants-1993_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05274065

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트