Acetic Acid → 2-n-Hexyl-3-cyanocyclopentanone
반응식
[CH2:1]([C:7]1[C:8](=[O:12])[CH2:9][CH2:10][CH:11]=1)[CH2:2][CH2:3][CH2:4][CH2:5][CH3:6].C(O)C.C(O)(=O)C.[C-:20]#[N:21].[K+]>O>[CH2:1]([CH:7]1[CH:11]([C:20]#[N:21])[CH2:10][CH2:9][C:8]1=[O:12])[CH2:2][CH2:3][CH2:4][CH2:5][CH3:6]참가 물질
반응 조건
- 온도
- 35 °C
실험 절차
In a 3-L three necked flask fitted with a mechanical stirrer, a reflux condenser, a dropping funnel and a thermometer, are placed 83 g of 2-n-hexyl-cyclopentenone, 1.75 L 95% ethyl alcohol and 30 g of glacial acetic acid. The mixtures is warmed up with sirring to 35° C and a solution of 65 g of potassium cyanide in 190 ml of water is added over a period of 15 minutes. Stirring is continued for 3 hours, the temperature being maintained at 35° C. The methanol is then distilled off at a reduced pressure the organic layer is separated, and the water phase is extracted with ether. The combined organic layer and ether extract are washed with sodium carbonate solution and water and dried over anhydrous sodium sulphate. The solvent is removed at atmospheric pressure and the residue is distilled through a short Vigreux column. 2-n-Hexyl-3-cyanocyclopentanone is collected at 106°-110° C/0,2 mm, yield 85 g (88%), nD 20 1.4658.
후처리
- temperaturethe temperature being maintained at 35° C
- distillationThe methanol is then distilled off at a reduced pressure the organic layer
- customis separated
- extractionthe water phase is extracted with ether
- extractionThe combined organic layer and ether extract
- washare washed with sodium carbonate solution and water
- dry with materialdried over anhydrous sodium sulphate
- customThe solvent is removed at atmospheric pressure
- distillationthe residue is distilled through a short Vigreux column
- custom2-n-Hexyl-3-cyanocyclopentanone is collected at 106°-110° C/0,2 mm, yield 85 g (88%), nD 20 1.4658
출처 및 근거
- ORD 기록
- ord-25bd6571689c4adaa27a3b2c1ad04b05
- 출처 데이터셋
- uspto-grants-1977_04
- 특허 번호
- US04016109
반응 노트
불러오는 중…