홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Sulfuric Acid → 5-Bromo-2-iodo-1,3-dimethylbenzene

HRID 341702
인쇄

반응식

HRID 341702 반응식
[Br:1][C:2]1[CH:8]=[C:7]([CH3:9])[C:5](N)=[C:4]([CH3:10])[CH:3]=1.S(=O)(=O)(O)O.N([O-])=O.[Na+].[I-:20].[K+]>O>[Br:1][C:2]1[CH:8]=[C:7]([CH3:9])[C:5]([I:20])=[C:4]([CH3:10])[CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 1118Sulfuric AcidHCID 4875Potassium IodideHCID 905494-Bromo-2,6-xylidineHCID 23668193Sodium Nitrite

생성물 1

HCID 27355735-Bromo-2-iodo-1,3-dimethylbenzene수율 65.2%

시약·촉매·용매 1

HCID 962Water용매3회

반응 조건

온도
60 °C

실험 절차

To a stirred mixture of 4-bromo-2,6-dimethylaniline (75 g, 0.37 mol) in distilled water (75 ml) is added concentrated sulphuric acid (75 ml), followed by brief heating to 60° C. for 1 hour until dissolution is complete. The mixture is allowed to cool to room temperature then further cooled to approximately 0° C. in an ice/salt bath. To this slurry is added an aqueous solution of sodium nitrite (25.33 g, 0.36 mol) in distilled water (126 ml) dropwise over 15 minutes, maintaining the temperature below 5° C., followed by additional stirring for 30 minutes. The reaction mixture is allowed to come to room temperature and then a solution of aqueous potassium iodide (187.6 g, 1.13 mol) in distilled water (190 ml) is added dropwise at room temperature. After the addition is complete the solution is briefly heated to 80° C. then allowed to cool to room temperature again. The reaction mixture is extracted with ethyl acetate (750 ml×3) and the organic phase is washed with 1M aqueous hydrochloric acid (200 ml) and aqueous sodium thiosulfate (2×200 ml). The organic phase is dried over anhydrous sodium sulphate and concentrated under reduced pressure. The residue is purified by column chromatography on silica gel to give 4-bromo-2,6-dimethyl-1-iodo benzene (75 g) as an orange liquid.

후처리

  1. temperatureto cool to room temperature
  2. temperaturethen further cooled to approximately 0° C. in an ice/salt bath
  3. temperaturemaintaining the temperature below 5° C.
  4. customto come to room temperature
  5. additionAfter the addition
  6. temperatureis briefly heated to 80° C.
  7. temperatureto cool to room temperature again
  8. extractionThe reaction mixture is extracted with ethyl acetate (750 ml×3)
  9. washthe organic phase is washed with 1M aqueous hydrochloric acid (200 ml) and aqueous sodium thiosulfate (2×200 ml)
  10. dry with materialThe organic phase is dried over anhydrous sodium sulphate
  11. concentrationconcentrated under reduced pressure
  12. customThe residue is purified by column chromatography on silica gel

출처 및 근거

ORD 기록
ord-0d89030a099e400a84015b8ec7853607
출처 데이터셋
uspto-grants-2014_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08895761B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트