홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

4-Methylbenzophenone → 4-(Bromomethyl)benzophenone

HRID 342367
인쇄

반응식

HRID 342367 반응식
[CH3:1][C:2]1[CH:15]=[CH:14][C:5]([C:6]([C:8]2[CH:13]=[CH:12][CH:11]=[CH:10][CH:9]=2)=[O:7])=[CH:4][CH:3]=1.[Br:16]Br>C1C=CC=CC=1>[Br:16][CH2:1][C:2]1[CH:15]=[CH:14][C:5]([C:6]([C:8]2[CH:13]=[CH:12][CH:11]=[CH:10][CH:9]=2)=[O:7])=[CH:4][CH:3]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 86524-Methylbenzophenone2회HCID 24408Bromine

생성물 1

HCID 1229514-(Bromomethyl)benzophenone수율 60%

시약·촉매·용매 1

HCID 241Benzene용매2회

실험 절차

4-Methylbenzophenone, 750 g (3.82 moles), was added to a 5 liter Morton flask equipped with an overhead stirrer and dissolved in 2850 ml of benzene. The solution was then heated to reflux, followed by the dropwise addition of 610 g (3.82 moles) of bromine in 330 ml of benzene. The addition rate was approximately 1.5 ml/min and the flask was illuminated with a 90 watt (90 joule/sec) halogen spotlight to initiate the reaction . A timer was used with the lamp to provide a 10% duty cycle (on 5 seconds, off 40 seconds), followed in one hour by a 20% duty cycle (on 10 seconds, off 40 seconds). At the end of the addition, the product was analyzed by gas chromatography and was found to contain 71% of the desired Compound VI, 8% of the dibromo product, and 20% unreacted 4-methylbenzophenone. After cooling, the reaction mixture was washed with 10 g of sodium bisulfite in 100 ml of water, followed by washing with 3×200 ml of water. The product was dried over sodium sulfate and recrystallized twice from 1:3 toluene : hexane. After drying under vacuum, 635 g of Compound VI were isolated, providing a yield of 60% and having a melting point of 112°-114° C. Analysis on an NMR spectrometer was consistent with the desired product: 1H NMR (CDCl3) aromatic protons 7.20-7.80 (m, 9 H) and benzylic protons 4.48 (s, 2 H). The final compound was stored for use in the preparation of a photoactivatable chain transfer agent as described in Example 7.

후처리

  1. customequipped with an overhead stirrer
  2. temperatureThe solution was then heated
  3. temperatureto reflux
  4. customthe reaction
  5. customto provide a 10% duty cycle (on 5 seconds, off 40 seconds)
  6. additionAt the end of the addition
  7. temperatureAfter cooling
  8. washthe reaction mixture was washed with 10 g of sodium bisulfite in 100 ml of water
  9. washby washing with 3×200 ml of water
  10. dry with materialThe product was dried over sodium sulfate
  11. customrecrystallized twice from 1:3 toluene
  12. customAfter drying under vacuum

출처 및 근거

ORD 기록
ord-e654ab9206c647e1989d502f0fecb3ea
출처 데이터셋
uspto-grants-1999_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05858653

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트