홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1,2-Dibromoethane → (2R)-5-hexyl-4-hydroxy-2-undecyl-2,3-dihydropyran-6-one

HRID 352035
인쇄

반응식

HRID 352035 반응식
[Mg].BrCCBr.Br[CH:7]([CH2:28][CH2:29][CH2:30][CH2:31][CH2:32][CH3:33])[C:8]([O:10][C@H:11]([CH2:17][CH2:18][CH2:19][CH2:20][CH2:21][CH2:22][CH2:23][CH2:24][CH2:25][CH2:26][CH3:27])[CH2:12][C:13]([O:15]C)=O)=[O:9]>II.C1COCC1>[CH2:28]([C:7]1[C:8](=[O:9])[O:10][C@H:11]([CH2:17][CH2:18][CH2:19][CH2:20][CH2:21][CH2:22][CH2:23][CH2:24][CH2:25][CH2:26][CH3:27])[CH2:12][C:13]=1[OH:15])[CH2:29][CH2:30][CH2:31][CH2:32][CH3:33]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 78391,2-Dibromoethane2회HCID 5462224MagnesiumHCID 11123443methyl (3R)-3-[(2-bromo-1-oxooctyl)oxy]-tetradecanoate

생성물 1

HCID 54690023(2R)-5-hexyl-4-hydroxy-2-undecyl-2,3-dihydropyran-6-one수율 45%

시약·촉매·용매 2

HCID 807Iodine촉매
HCID 8028
Tetrahydrofuran
용매
2회

반응 조건

온도
80 °C

실험 절차

To a 1-L, 3-necked, round-bottomed flask fitted with a Claisen adapter with N2 inlet, a West condenser and a thermocouple-J-KEM controller and a rubber septum was added 13.9 g (0.572 g-atom, 3.2 equiv.) of magnesium (from Chromasco) was added. A small flake of I2 (about 45 mg) was added and the mixture was heated to about 80° C. 1,2-Dibromoethane (3.4 g, 18 mmol) and 350 mL of THF were added to the hot Mg/I2 mixture to activate the metal surface. Methyl (3R)-3-[(2-bromo-1-oxooctyl)oxy]-tetradecanoate (82.9 g, 179 mmol) from Example 2, 1,2-dibromoethane (33.6 g, 179 mmol) and 400 mL of THF were added to the addition funnel. This mixture was slowly added to the Mg/THF mixture at reflux over about 1 h. The reaction mixture was stirred overnight (14 h) at about 60° C. The resulting yellow solution was decanted away from the metal into a 1-L, round-bottomed flask. The residual Mg metal was rinsed twice with 60 mL of THF. The combined THF solution was concentrated on a rotary evaporator. The syrupy mixture was taken up in 1750 mL of methylene chloride and added to a mixture of 500 mL of water, 200 mL of ice and 98 mL of 10% HCl in a separatory funnel. The aqueous layer was removed, the organic layer washed once with 200 mL of saturated sodium chloride, dried (NaSO4), filtered, and the solvent removed on a rotary evaporator. The crude white solid (66.7 g) was slurried in 100 mL of hexane, cooled to 0° C., filtered, and rinsed twice with 50 mL of cold hexane. The isolated white solid was dried in an oven at 40° C. under reduced pressure (10 mm Hg) overnight resulting in 28.4 g of (6R)-3-hexyl-4-hydroxy-6-undecyl-5,6-dihydropyran-2-one (45-50% yield based on methyl (R)-3-hydroxytetradecanoate).

후처리

  1. additionwas added
  2. temperatureat reflux over about 1 h
  3. customThe resulting yellow solution was decanted away from the metal into a 1-L, round-bottomed flask
  4. washThe residual Mg metal was rinsed twice with 60 mL of THF
  5. concentrationThe combined THF solution was concentrated on a rotary evaporator
  6. additionadded to a mixture of 500 mL of water, 200 mL of ice and 98 mL of 10% HCl in a separatory funnel
  7. customThe aqueous layer was removed
  8. washthe organic layer washed once with 200 mL of saturated sodium chloride
  9. dry with materialdried (NaSO4)
  10. filtrationfiltered
  11. customthe solvent removed on a rotary evaporator
  12. temperaturecooled to 0° C.
  13. filtrationfiltered
  14. washrinsed twice with 50 mL of cold hexane
  15. customThe isolated white solid was dried in an oven at 40° C. under reduced pressure (10 mm Hg) overnight

출처 및 근거

ORD 기록
ord-1a2c1b5c78a14482960cbc26989852ac
출처 데이터셋
uspto-grants-2004_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06743927B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트