홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

18-Crown-6 → 1-Ethenylpyrene

HRID 36381
인쇄

반응식

HRID 36381 반응식
CC(C)([O-])C.[K+].C1O[CH2:23][CH2:22]OCCOCCOCCOCCOC1.[C:25]1(C=O)[C:38]2[C:39]3=[C:40]4[C:35](=[CH:36][CH:37]=2)[CH:34]=[CH:33][CH:32]=[C:31]4[CH:30]=[CH:29][C:28]3=[CH:27][CH:26]=1>[Br-].C[P+](C1C=CC=CC=1)(C1C=CC=CC=1)C1C=CC=CC=1.O1CCCC1.C(OCC)C>[CH:25]([C:38]1[C:39]2[C:40]3=[C:22]4[C:23](=[CH:27][CH:28]=2)[CH:29]=[CH:30][CH:31]=[C:32]4[CH:33]=[CH:34][C:35]3=[CH:36][CH:37]=1)=[CH2:26]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 3

HCID 2855718-Crown-6HCID 2328481-PyrenecarboxaldehydeHCID 23665647Potassium tert-butoxide

생성물 1

HCID 1463221-Ethenylpyrene수율 3,859.4%

시약·촉매·용매 3

HCID 74505Methyltriphenyliphosphonium bromide촉매HCID 3283Diethyl Ether
용매
2회
HCID 8028Tetrahydrofuran용매3회

반응 조건

온도
0 °C

실험 절차

A 250 mL round-bottomed flask, equipped with a magnetic stirrer, an argon inlet and a Claisen adapter bearing an addition funnel and an argon outlet leading to a mineral oil bubbler, was dried in an oven, assembled hot and cooled under a stream of argon. The flask was charged with methyltriphenyl phosphonium bromide (8.4788 g, 23.73 mmole), potassium t-butoxide (23.7 mL of a 1.0M solution in tetrahydrofuran) and 18-crown-6 (0.180 g). Dry tetrahydrofuran (70 mL) was transferred to the flask under nitrogen using a cannula and the resultant reaction mixture was cooled to 0° C. using an ice-salt bath. Pyrene-1-carboxaldehyde (5.0 g, 21.7 mmole) was dissolved in dry THF (25 mL) and this solution was transferred to the addition funnel, under a nitrogen atmosphere, using a cannula, and then added dropwise to the cold reaction mixture over a period of 10 minutes. The reaction mixture was allowed to warm to room temperature and stirred overnight under an argon atmosphere. The solid which precipitated was filtered, washed with THF (15 mL) on the frit and the combined filtrate was concentrated on a rotary evaporator to give a solid residue, which was dissolved in dry diethyl ether (50 mL). The ether solution was passed through a short bed of neutral alumina washed with ether and the combined ether filtrate was concentrated to give a yellow solid (6.0 g). This yellow solid was chromatographed on silica gel with hexanes as eluent and the chromatographed material thus obtained was further purified by crystallization from 5% water/ethanol to give an off-white crystalline material (2.1655 g), melting point 88°-89° C. (89° C. according to Kamat, P. V.; Basheer, R.; and Fox, M. A. Macromolecules 18, 1366 (1985)).

후처리

  1. customA 250 mL round-bottomed flask, equipped with a magnetic stirrer, an argon inlet
  2. customwas dried in an oven
  3. temperaturecooled under a stream of argon
  4. customthe resultant reaction mixture
  5. additionadded dropwise to the cold reaction mixture over a period of 10 minutes
  6. temperatureto warm to room temperature
  7. customThe solid which precipitated
  8. filtrationwas filtered
  9. washwashed with THF (15 mL) on the frit
  10. concentrationthe combined filtrate was concentrated on a rotary evaporator
  11. customto give a solid residue, which
  12. washwashed with ether
  13. concentrationthe combined ether filtrate was concentrated

출처 및 근거

ORD 기록
ord-7be1e30e7663485788bafc81ce640555
출처 데이터셋
uspto-grants-1995_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05414069

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트