Dimethylhydantoin → Nilutamide

HRID 374123

반응식

HRID 374123 반응식
COCCOCCOCCOC.[N+:13]([C:16]1[CH:21]=[CH:20][C:19](Cl)=[CH:18][C:17]=1[C:23]([F:26])([F:25])[F:24])([O-:15])=[O:14].[CH3:27][C:28]1([CH3:35])[NH:32][C:31](=[O:33])[NH:30][C:29]1=[O:34]>>[F:24][C:23]([F:26])([F:25])[C:17]1[CH:18]=[C:19]([N:30]2[C:29](=[O:34])[C:28]([CH3:35])([CH3:27])[NH:32][C:31]2=[O:33])[CH:20]=[CH:21][C:16]=1[N+:13]([O-:15])=[O:14]

참가 물질

4

반응물 3

HCID 6491DimethylhydantoinHCID 8189TriglymeHCID 670525-Chloro-2-nitrobenzotrifluoride

생성물 1

HCID 4493Nilutamide수율 30%

반응 조건

온도
20 °C

실험 절차

The following were introduced into 282 ml of triglyme: 112.8 grams of 2-nitro-5-chloro-trifluoromethylbenzene, 64.1 grams of 5,5-dimethyl-hydantoin and 33.5 grams of cuprous oxide. The mixture was heated to about 215° C.±5° C. for 4 hours, then cooled to 20° C. and filtered. The triglyme solution was recovered and a 22 Be ammonia solution (1V), toluene (1V) and demineralized water (4V) were added to the solution of triglyme (1V). The solution was stirred at 20° C. for 15 minutes, then cooled to about -10° C. and stirred again at -10° C. After washing and drying, 47.6 grams of the desired product were obtained.

후처리

  1. temperatureThe mixture was heated to about 215° C.±5° C. for 4 hours
  2. filtrationfiltered
  3. customThe triglyme solution was recovered
  4. additiona 22 Be ammonia solution (1V), toluene (1V) and demineralized water (4V) were added to the solution of triglyme (1V)
  5. temperaturecooled to about -10° C.
  6. stirringstirred again at -10° C
  7. washAfter washing
  8. customdrying

출처 및 근거

ORD 기록
ord-e1a261677b474525b612c97fa3ced3ef
출처 데이터셋
uspto-grants-1992_11
특허 번호
US05166358

연결된 노트

불러오는 중…