홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

7-[(6-methylpyridin-3-yl)ethynyl]-3,4,5,6-tetrahydro-1H-2,5-ethanoazepino[4,3-b]indole → 7-[(Z)-2-(6-methylpyridin-3-yl)vinyl]-3,4,5,6-tetrahydro-1H-2,5-ethanoazepino[4,3-b]indole

HRID 37804
인쇄

반응식

HRID 37804 반응식
[CH3:1][C:2]1[N:7]=[CH:6][C:5]([C:8]#[C:9][C:10]2[C:18]3[NH:17][C:16]4[CH:19]5[CH2:25][CH2:24][N:22]([CH2:23][C:15]=4[C:14]=3[CH:13]=[CH:12][CH:11]=2)[CH2:21][CH2:20]5)=[CH:4][CH:3]=1>CO.[Pd].CC([O-])=O.CC([O-])=O.[Pb+2]>[CH3:1][C:2]1[N:7]=[CH:6][C:5](/[CH:8]=[CH:9]\[C:10]2[C:18]3[NH:17][C:16]4[CH:19]5[CH2:25][CH2:24][N:22]([CH2:23][C:15]=4[C:14]=3[CH:13]=[CH:12][CH:11]=2)[CH2:21][CH2:20]5)=[CH:4][CH:3]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 1

HCID 532507637-[(6-methylpyridin-3-yl)ethynyl]-3,4,5,6-tetrahydro-1H-2,5-ethanoazepino[4,3-b]indole

생성물 1

HCID 532514297-[(Z)-2-(6-methylpyridin-3-yl)vinyl]-3,4,5,6-tetrahydro-1H-2,5-ethanoazepino[4,3-b]indole

시약·촉매·용매 2

HCID 131709914Lindlars catalyst촉매HCID 887Methanol용매

실험 절차

The product of Example 3 (100.9 mg, 0.308 mmol) was dissolved in methanol (5 mL). Lindlar catalyst (5% Pd on CaCO3 poisoned with lead, Aldrich, 9.8 mg) was added to the reaction mixture. The reaction flask was purged with nitrogen then purged with hydrogen, and the mixture was stirred under hydrogen (1 atm) at room temperature for 3 hours. The flask was purged with nitrogen and the reaction mixture was filtered. The filtrate was concentrated under vacuum, and the residue was purified by reverse-phase HPLC [Waters XBridge™ RP18 column, 5 μm, 30×100 mm, flow rate 40 mL/minute, 20-99% gradient of methanol in buffer (0.1 M aqueous ammonium bicarbonate, adjusted to pH 10 with ammonium hydroxide)] to afford the title compound: 1H NMR (300 MHz, methanol-d4) δ ppm 2.01-2.10 (m, 4H), 2.41 (s, 3H), 2.97-3.13 (m, 3H), 3.21-3.26 (m, 2H), 26 (s, 2H), 6.69 (d, J=12.2 Hz, 1H), 6.88-6.90 (m, 2H), 6.99 (d, J=11.9 Hz, 1H), 7.04 (d, J=8.1 Hz, 1H), 7.21-7.26 (m, 1H) 7.44 (dd, J=8.2, 2.0 Hz, 1H), 8.16 (d, J=2.4 Hz, 1H); MS (APCI) m/z 330 (M+H)+.

후처리

  1. customThe reaction flask was purged with nitrogen
  2. customthen purged with hydrogen
  3. customThe flask was purged with nitrogen
  4. filtrationthe reaction mixture was filtered
  5. concentrationThe filtrate was concentrated under vacuum
  6. customthe residue was purified by reverse-phase HPLC [Waters XBridge™ RP18 column, 5 μm, 30×100 mm, flow rate 40 mL/minute, 20-99% gradient of methanol in buffer (0.1 M aqueous ammonium bicarbonate, adjusted to pH 10 with ammonium hydroxide)]

출처 및 근거

ORD 기록
ord-e5a2f8c0ebc8468fa4225b0de8237811
출처 데이터셋
uspto-grants-2013_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08524703B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트