홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Styrene-acrylate → Styrene acrylic acid copolymer

HRID 383215
인쇄

반응식

HRID 383215 반응식
[CH:1]([CH:9]=[CH:10][C:11]([O-:13])=[O:12])=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1>O>[C:11]([OH:13])(=[O:12])[CH:10]=[CH2:9].[CH2:1]=[CH:2][C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][CH:4]=1
참가 물질실험 절차출처 및 근거반응 노트

참가 물질

4

반응물 1

HCID 3670169Styrene-acrylate

생성물 2

HCID 22481611Styrene acrylic acid copolymerHCID 178435160HCID 178435160, 화합물

시약·촉매·용매 1

HCID 962Water용매

실험 절차

A yellow styrene acrylate high gloss toner was prepared at a 2 liter bench scale (about 165 grams dry theoretical toner). The core toner slurry included about 221.4 grains of 42% solids of a styrene-acrylate latex, produced by emulsion polymerization (glass transition temperature (Tg) 51° C.+/−2° C.), with about 511.8 grams of deionized water, about 59.4 grams of polyethylene wax (commercially available from IGI) (about 31.3% solids) and about 54 grams of yellow pigment (Y74 from Sun Chemical Inc., about 20% solids), that were mixed together in a 2 liter plastic beaker. The slurry was then homogenized for a total of about 10 minutes with mixing at from about 3000 to about 4000 revolutions per minute (rpm) while adding in a coagulant solution, which included about 2.97 grams polyaluminum chloride and about 26.73 grams of about 0.02M nitric acid.

출처 및 근거

ORD 기록
ord-5dbe5357ea2742cc9215af931f1f2183
출처 데이터셋
uspto-grants-2013_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08367294B2

반응 노트

이 페이지에서참가 물질실험 절차출처 및 근거반응 노트