홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

N-tert-butoxycarbonyl-3-methoxy-2-methylaniline → 1-[2-(Tert-butoxycarbonylamino)-6-methoxyphenyl]-2-butanone

HRID 397855
인쇄

반응식

HRID 397855 반응식
C([Li])(CC)C.[C:6]([O:10][C:11]([NH:13][C:14]1[CH:19]=[CH:18][CH:17]=[C:16]([O:20][CH3:21])[C:15]=1[CH3:22])=[O:12])([CH3:9])([CH3:8])[CH3:7].CON(C)[C:26](=[O:29])[CH2:27][CH3:28]>C1CCCCC1.C1COCC1>[C:6]([O:10][C:11]([NH:13][C:14]1[CH:19]=[CH:18][CH:17]=[C:16]([O:20][CH3:21])[C:15]=1[CH2:22][C:26](=[O:29])[CH2:27][CH3:28])=[O:12])([CH3:9])([CH3:8])[CH3:7]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 10609918N-tert-butoxycarbonyl-3-methoxy-2-methylanilineHCID 11344007N-Methoxy-N-methylpropionamideHCID 178418400CID 53628100

생성물 1

HCID 107324851-[2-(Tert-butoxycarbonylamino)-6-methoxyphenyl]-2-butanone

시약·촉매·용매 2

HCID 8028Tetrahydrofuran용매2회
HCID 8078
Cyclohexane
용매

반응 조건

온도
-60 °C

실험 절차

A solution of 140 mL (0.18 mol) of 1.3M sec-butyl lithium in cyclohexane is added slowly to N-tert-butoxycarbonyl-3-methoxy-2-methylaniline (21.3 g, 0.09 mol) in 250 mL of THF keeping the temperature below −40° C. with a dry ice-ethanol bath. The bath is removed and the temperature allowed to rise to 0° C. and then the bath replaced. After the temperature has cooled to −60° C., 18.5 g (0.18 mol) of N-methoxy-N-methylpropanamide in an equal volume of THF iss added dropwise. The reaction mixture is stirred 5 minutes, the cooling bath removed and stirred an additional 18 hours. It is then poured into a mixture of 300 mL of ether and 400 mL of 0.5N HCl. The organic layer is separated, washing with water, brine, dried over MgSO4, and concentrated at reduced pressure to give 25.5 g of a crude of 1-[2-(tert-butoxycarbonylamino)-6-methoxyphenyl]-2-butanone. This material is dissolved in 250 mL of methylene chloride and 50 mL of trifluoroacetic acid and stirred for a total of 17 hours. The mixture is concentrated at reduced pressure and ethyl acetate and water added to the remaining oil. The ethyl acetate is separated, washed with brine, dried (MgSO4) and concentrated. The residue is chromatographed three times on silica eluting with 20% EtOAc/hexane to give 13.9 g of 2-ethyl-4-methoxy-1H-indole.

후처리

  1. customThe bath is removed
  2. customto rise to 0° C.
  3. additionadded dropwise
  4. customthe cooling bath removed
  5. stirringstirred an additional 18 hours
  6. additionIt is then poured into a mixture of 300 mL of ether and 400 mL of 0.5N HCl
  7. customThe organic layer is separated
  8. washwashing with water, brine
  9. dry with materialdried over MgSO4
  10. concentrationconcentrated at reduced pressure

출처 및 근거

ORD 기록
ord-f6bb416d6c16433f97118fe0a337b6da
출처 데이터셋
uspto-grants-2003_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06610728B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트