홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Chlorine → 4-(5-Chloro-2,3-dihydrobenzofuran-7-yl)-1,1,1-trifluoro-4-methylpentan-2-one

HRID 400617
인쇄

반응식

HRID 400617 반응식
[O:1]1[C:5]2[C:6]([C:10]([CH3:19])([CH3:18])[CH2:11][C:12](=[O:17])[C:13]([F:16])([F:15])[F:14])=[CH:7][CH:8]=[CH:9][C:4]=2[CH2:3][CH2:2]1.[Cl:20]Cl>C(O)(=O)C>[Cl:20][C:8]1[CH:7]=[C:6]([C:10]([CH3:19])([CH3:18])[CH2:11][C:12](=[O:17])[C:13]([F:15])([F:16])[F:14])[C:5]2[O:1][CH2:2][CH2:3][C:4]=2[CH:9]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 24526Chlorine3회HCID 469392134-(2,3-Dihydrobenzofur-7-yl)-1,1,1-trifluoro-4-methyl-2-pentanone

생성물 1

HCID 469392144-(5-Chloro-2,3-dihydrobenzofuran-7-yl)-1,1,1-trifluoro-4-methylpentan-2-one

시약·촉매·용매 1

HCID 176Acetic Acid용매2회

실험 절차

A solution of 4-(2,3-dihydrobenzofuran-7-yl)-1,1,1-trifluoro-4-methylpentan-2-one (20.8 g, 76.2 mmol) in 200 mL of acetic acid was treated with a solution of chlorine gas (Cl2) in acetic acid (prepared by bubbling chlorine gas into acetic acid, ˜1.19 M). The reaction was monitored by 1H-NMR. The ratio of the starting material to product was determined based on the integration of CH2 signal of the respective ketones (starting material: δ=3.32 ppm; product: δ=3.32 ppm). The concentration of the Cl2 solution was recalculated based on the NMR ratios and an additional portion of Cl2 solution was added (this process was repeated until NMR showed the complete consumption of the starting material). The mixture was quenched with 500 mL of water and solid sodium bicarbonate (˜500 g) was added carefully during 1 hour. The mixture was poured onto 500 mL of ethyl acetate. The phases were separated and the aqueous layer was extracted with three 500 mL portions of ethyl acetate. The combined organic layers were washed with two 100 mL portions of brine, dried over magnesium sulfate, filtered, and concentrated in vacuo to afford 23.4 g of the title product (quantitative yield), which was used without purification.

후처리

  1. customthe complete consumption of the starting material)
  2. customThe mixture was quenched with 500 mL of water and solid sodium bicarbonate (˜500 g)
  3. additionwas added carefully during 1 hour
  4. additionThe mixture was poured onto 500 mL of ethyl acetate
  5. customThe phases were separated
  6. extractionthe aqueous layer was extracted with three 500 mL portions of ethyl acetate
  7. washThe combined organic layers were washed with two 100 mL portions of brine
  8. dry with materialdried over magnesium sulfate
  9. filtrationfiltered
  10. concentrationconcentrated in vacuo

출처 및 근거

ORD 기록
ord-8bb2be9396db4b9d9c94350b16e56bb0
출처 데이터셋
uspto-grants-2014_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08741897B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트