홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Dextromethorphan Hydrobromide → Dextromethorphan

HRID 403106
인쇄

반응식

HRID 403106 반응식
[CH3:1][N:2]1[C@H:11]2[CH2:12][C:13]3[CH:18]=[CH:17][C:16]([O:19][CH3:20])=[CH:15][C:14]=3[C@:5]3([C@@H:10]2[CH2:9][CH2:8][CH2:7][CH2:6]3)[CH2:4][CH2:3]1.Br>O>[CH3:1][N:2]1[C@H:11]2[CH2:12][C:13]3[CH:18]=[CH:17][C:16]([O:19][CH3:20])=[CH:15][C:14]=3[C@:5]3([C@@H:10]2[CH2:9][CH2:8][CH2:7][CH2:6]3)[CH2:4][CH2:3]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 1

HCID 5464025Dextromethorphan Hydrobromide

생성물 1

HCID 5360696Dextromethorphan

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
77.5 °C

실험 절차

Uncoated Dextromethorphan Resin Complex was prepared by first dissolving 119.28 g of dextromethorphan HBr in 1 L of purified water heated to 75-80° C., followed by the addition of 223.01 g AMBERLITE IRP-69 resin under gentle mixing for 4 hours. At the completion, the suspension was allowed to settle, and was then decanted and rinsed with purified water twice and dried in an oven maintained at 50° C. until the moisture content was around 5%. The dried resin complex was hand sieved through a 40 mesh screen.

후처리

  1. additionfollowed by the addition of 223.01 g AMBERLITE IRP-69 resin
  2. additionunder gentle mixing for 4 hours
  3. customwas then decanted
  4. washrinsed with purified water twice
  5. customdried in an oven
  6. temperaturemaintained at 50° C. until the moisture content
  7. filtrationsieved through a 40 mesh screen

출처 및 근거

ORD 기록
ord-90830b39a15c4d1894a363d0f7ff9003
출처 데이터셋
uspto-grants-2014_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08747902B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트