[N:1]1[CH:6]=[CH:5][CH:4]=[C:3]([C:7]2[CH:12]=[CH:11][N:10]=[C:9]([NH2:13])[CH:8]=2)[CH:2]=1.C([O-])([O-])=O.[K+].[K+].Br[C:21]1[CH:26]=[C:25]([N+:27]([O-:29])=[O:28])[CH:24]=[CH:23][C:22]=1[CH3:30].CNCCNC.N.[Na+].[Cl-]>[Cu]I.O1CCOCC1>[CH3:30][C:22]1[CH:21]=[CH:26][C:25]([N+:27]([O-:29])=[O:28])=[CH:24][C:23]=1[NH:13][C:9]1[CH:8]=[C:7]([C:3]2[CH:2]=[N:1][CH:6]=[CH:5][CH:4]=2)[CH:12]=[CH:11][N:10]=14-(Pyridine-3-yl)pyridine-2-amine (8.60 g, 0.05 mol), CuI (2.39 g, 0.0125 mmol), anhydrous K2CO3 (14.0 g, 0.1 mol), KI (2.08 g, 0.0125 mol) were added to a Schlenk-type three-neck flask fitted with a thermometer, magnetic stirbar, and septum. The flask was evacuated and back filled with N2 three times. Dioxane (250 mL) and 2-bromo-4-nitrotoluene (9.82 g, 0.045 mol) were added to the flask. Finally, N,N′-dimethylethylenediamine (1.10 g, 0.0125 mol) was added by syringe at room temperature with stirring. The reaction mixture was stirred at 110° C. under N2 for 24 hours and then cooled to room temperature. Ammonia (30%, 100 mL) and saturated NaCl (400 mL), were added to the reaction mixture which was then extracted with ethyl acetate (500 mL×3). The organic phase was dried over Na2SO4 and a yellow solid was obtained after the solvent was removed under reduced pressure. The crude product was purified by column chromatography (biotage: DMC/Methanol, 1-8%, 20 CV). The desired product was obtained as a yellow solid (8.3 g, yield: 60%); 1H NMR (500 MHz, CDCl3) δ 2.49 (s, 3H), 7.36 (m, 1H), 7.15 (br., 1H), 7.35 (d, 1H), 7.38 (d, 1H), 7.52 (m, 1H), 7.88 (d, 1H), 8.55 (d, 1H), 8.60 (d, 1H), 8.76 (d, 1H), 9.28 (s, 1H), 9.50 (s, 1H). LC-MS (m/z) calculated, 307.3, found, 308.3 [M+H]+.
불러오는 중…
