홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Potassium Iodide → 3-chloro-N-[(1R)-1-(naphthalen-1-yl)ethyl]prop-2-en-1-amine

HRID 410141
인쇄

반응식

HRID 410141 반응식
C(=O)([O-])[O-].[K+].[K+].[I-].[K+].[Cl:9][CH:10]=[CH:11][CH2:12]Cl.[C:14]1([C@H:24]([NH2:26])[CH3:25])[C:23]2[C:18](=[CH:19][CH:20]=[CH:21][CH:22]=2)[CH:17]=[CH:16][CH:15]=1>C(O)(C)C>[Cl:9][CH:10]=[CH:11][CH2:12][NH:26][C@@H:24]([C:14]1[C:23]2[C:18](=[CH:19][CH:20]=[CH:21][CH:22]=2)[CH:17]=[CH:16][CH:15]=1)[CH3:25]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 4875Potassium IodideHCID 11430Potassium CarbonateHCID 248831,3-DichloropropeneHCID 2724264(+)-1-(1-Naphthyl)ethylamine

생성물 1

HCID 866746003-chloro-N-[(1R)-1-(naphthalen-1-yl)ethyl]prop-2-en-1-amine수율 51.7%

시약·촉매·용매 1

HCID 3776
Isopropanol
용매

실험 절차

Potassium carbonate (161.2 g) and potassium iodide (5 g) were added to the mixture of 1,3-dichloropropene (97.3 g) and (R)-1-(1-naphthyl)ethylamine (100 g) in isopropyl alcohol (500 mL) at room temperature. The reaction mixture was refluxed at 80° C. to 85° C. for about 4 hours. After the completion of the reaction, mixture was cooled to room temperature and filtered through hyflo bed. Hyflo bed was washed with isopropyl alcohol (500 mL). The filtrate was combined and treated with hydrochloric acid (6 Normal; 100 mL) at room temperature. The solution was allowed to stir for about one hour at room temperature to give solid. The solid was filtered and was washed twice with isopropyl alcohol (2×100 mL). Methanol (750 mL) was added to the wet solid and stirred for 10-15 minutes at room temperature. The pH of solution was adjusted to 11 to 12 using a solution of sodium hydroxide in water (20%). The solution was diluted with de-ionized water (750 mL) and extracted with dichloromethane (500 mL). Layers were separated and the organic layer was washed twice with de-ionized water (2×500 mL). The organic layer was completely concentrated under vacuum at 40° C. to 45° C. to give 3-chloro-N-[(1R)-1-(naphthalen-1-yl)ethyl]prop-2-en-1-amine as oil.

후처리

  1. temperatureThe reaction mixture was refluxed at 80° C. to 85° C. for about 4 hours
  2. customAfter the completion of the reaction, mixture
  3. filtrationfiltered through hyflo bed
  4. washHyflo bed was washed with isopropyl alcohol (500 mL)
  5. additiontreated with hydrochloric acid (6 Normal; 100 mL) at room temperature
  6. customto give solid
  7. filtrationThe solid was filtered
  8. washwas washed twice with isopropyl alcohol (2×100 mL)
  9. additionMethanol (750 mL) was added to the wet solid
  10. stirringstirred for 10-15 minutes at room temperature
  11. additionThe solution was diluted with de-ionized water (750 mL)
  12. extractionextracted with dichloromethane (500 mL)
  13. customLayers were separated
  14. washthe organic layer was washed twice with de-ionized water (2×500 mL)
  15. concentrationThe organic layer was completely concentrated under vacuum at 40° C. to 45° C.

출처 및 근거

ORD 기록
ord-43f20897b98242b6b3c9e7482160aafd
출처 데이터셋
uspto-grants-2014_06
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08759586B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트