홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

t-Butylacrylamide → t-butylacrylamide 4-styrenesulfonic Acid Sodium Salt

HRID 411790
인쇄

반응식

HRID 411790 반응식
O.[Na+:2].[CH2:3]=[CH:4][C:5]1[CH:10]=[CH:9][C:8]([S:11]([O-:14])(=[O:13])=[O:12])=[CH:7][CH:6]=1.[C:15]([C:19](=[CH2:23])[C:20]([NH2:22])=[O:21])([CH3:18])([CH3:17])[CH3:16]>O>[C:15]([C:19](=[CH2:23])[C:20]([NH2:22])=[O:21])([CH3:18])([CH3:17])[CH3:16].[Na+:2].[CH2:3]=[CH:4][C:5]1[CH:6]=[CH:7][C:8]([S:11]([O-:14])(=[O:13])=[O:12])=[CH:9][CH:10]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 18539458t-ButylacrylamideHCID 23681144Sodium 4-ethenylbenzene-1-sulfonate--water (1/1/1)

생성물 1

HCID 131723881t-butylacrylamide 4-styrenesulfonic Acid Sodium Salt

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
75 °C

실험 절차

In a 250 mL Morton flask (fitted with mechanical stirrer, thermometer, and oil bath heating) under argon atmosphere were combined 4-styrenesulfonic acid sodium salt hydrate (0.10 g), t-butylacrylamide (Aldrich, 9.9 g), α-olefin sulfonate surfactant (Rhodia, Rhodacal A-246/L, 12.5 g of a ca. 40% aqueous solution), and water (175 g). The mixture was stirred and heated in a 90° C. oil bath until an internal temperature of ca. 75° C. was obtained, and then solid initiator (K2S2O8, Aldrich, 0.20 g) was added all at once. The appearance of the aqueous monomer slurry changed quickly over a period of 1-4 minutes, with the solid dissolving to form a nearly transparent, bluish scattering emulsion. The mixture was stirred and heated in a 100° C. oil bath for an additional 2 h (internal temperature of 93° C.) to decompose the excess initiator. The mixture was cooled with stirring, and filtered to remove any suspended solid. Yield 196.2 g of emulsion, pH ca. 3 to pH paper, 8.07% solids, particle size=9.3 nm Rh, by DLS, (2nd cumulant analysis PDI=0.10).

후처리

  1. customIn a 250 mL Morton flask (fitted with mechanical stirrer
  2. temperaturethermometer, and oil bath heating) under argon atmosphere
  3. customwas obtained
  4. additionsolid initiator (K2S2O8, Aldrich, 0.20 g) was added all at once
  5. dissolutiondissolving
  6. customto form a nearly transparent,
  7. stirringThe mixture was stirred
  8. temperatureheated in a 100° C. oil bath for an additional 2 h (internal temperature of 93° C.)
  9. temperatureThe mixture was cooled
  10. stirringwith stirring
  11. filtrationfiltered
  12. customto remove any suspended solid

출처 및 근거

ORD 기록
ord-0b16e048396b4a70b4066d0539157142
출처 데이터셋
uspto-grants-2003_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06559255B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트