홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Water → 2-Methyl-4-acetaminobiphenyl

HRID 413496
인쇄

반응식

HRID 413496 반응식
C(=O)([O-])[O-].[Na+].[Na+].[CH3:7][C:8]1[CH:13]=[C:12]([NH:14][C:15]([CH3:17])=[O:16])[CH:11]=[CH:10][C:9]=1Br.[C:19]1(B(O)O)[CH:24]=[CH:23][CH:22]=[CH:21][CH:20]=1.O>CO.Cl[Pd](Cl)([P](C1C=CC=CC=1)(C1C=CC=CC=1)C1C=CC=CC=1)[P](C1C=CC=CC=1)(C1C=CC=CC=1)C1C=CC=CC=1>[CH3:7][C:8]1[CH:13]=[C:12]([NH:14][C:15]([CH3:17])=[O:16])[CH:11]=[CH:10][C:9]=1[C:19]1[CH:24]=[CH:23][CH:22]=[CH:21][CH:20]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 962WaterHCID 10340Sodium CarbonateHCID 66827Phenylboronic AcidHCID 738336N-(4-Bromo-3-methylphenyl)acetamide

생성물 1

HCID 111721562-Methyl-4-acetaminobiphenyl

시약·촉매·용매 2

HCID 178418476HCID 178418476, 화합물촉매
HCID 887
Methanol
용매
3회

실험 절차

225 g of sodium carbonate and 0.15 g of PdCl2(PPh3)2 in 450 ml of methanol are heated to reflux temperature. A solution of 342 g of 4-bromo-3-methylacetanilide and 270 g of the ethylene glycol ester of phenylboronic acid in 225 ml of methanol, which has been heated to 50° C., is added dropwise over a period of 60 minutes. During the addition, methanol is distilled off in such an amount that the internal temperature can be kept at at least 85° C. After addition is complete, a further 0.1 g of the Pd catalyst is added and the reaction mixture is refluxed for another 6 hours. After this time, the monitoring of the reaction by HPLC indicates a conversion of 99.9%. The remaining methanol is distilled off as completely as possible (620 ml), with the reaction mixture having to remain stirrable. 1250 ml of chlorobenzene are subsequently added. Hydrolysis is carried out by addition of 85 ml of water. At 70-80° C., the phases are separated and the aqueous phase is discarded. The organic phase is washed once with 50 ml of water and is subsequently filtered through a 0.5 cm thick layer of aluminum oxide. The chlorobenzene is distilled off at 300-500 mbar. The residue of crude 2-methyl-4-acetaminobiphenyl which remains is used further without further purification. The yield is quantitative.

후처리

  1. temperatureto reflux temperature
  2. additionis added dropwise over a period of 60 minutes
  3. distillationis distilled off in such an amount that the internal temperature
  4. customcan be kept at at least 85° C
  5. additionAfter addition
  6. additiona further 0.1 g of the Pd catalyst is added
  7. temperaturethe reaction mixture is refluxed for another 6 hours
  8. customAfter this time, the monitoring of the reaction by HPLC
  9. distillationThe remaining methanol is distilled off as completely as possible (620 ml)
  10. addition1250 ml of chlorobenzene are subsequently added
  11. customHydrolysis
  12. customAt 70-80° C., the phases are separated
  13. washThe organic phase is washed once with 50 ml of water
  14. filtrationis subsequently filtered through a 0.5 cm thick layer of aluminum oxide
  15. distillationThe chlorobenzene is distilled off at 300-500 mbar
  16. customThe residue of crude 2-methyl-4-acetaminobiphenyl which remains is used further without further purification

출처 및 근거

ORD 기록
ord-600da2ddfeed427f8b5700268948762e
출처 데이터셋
uspto-grants-2003_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06566546B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트