Nitric Acid → 2,3-dichloro-6-nitrobenzaldehyde

HRID 41353

반응식

HRID 41353 반응식
[Cl:1][C:2]1[C:9]([Cl:10])=[CH:8][CH:7]=[CH:6][C:3]=1[CH:4]=[O:5].[N+:11]([O-])([OH:13])=[O:12]>S(=O)(=O)(O)O>[Cl:1][C:2]1[C:9]([Cl:10])=[CH:8][CH:7]=[C:6]([N+:11]([O-:13])=[O:12])[C:3]=1[CH:4]=[O:5]

참가 물질

4

반응물 2

HCID 944Nitric AcidHCID 357452,3-Dichlorobenzaldehyde

생성물 1

HCID 112182712,3-dichloro-6-nitrobenzaldehyde

시약·촉매·용매 1

HCID 1118Sulfuric Acid용매

실험 절차

To 2,3-dichlorobenzaldehyde (20 g, 114 mmol) in concentrated sulfuric acid (100 mL) was added cautiously fuming nitric acid (5.4 mL, 8.16 g, 130 mmol). The resulting solution was stirred for 1 hour, then poured onto an ice/water slurry and the precipitate collected by filtration. This was dissolved in diethyl ether (400 mL), and the solution washed with water and saturated sodium carbonate, then dried (MgSO4) and concentrated. The residue was re-dissolved in the minimum amount of hot diethyl ether, then poured quickly into vigorously stirred petrol (1 L). After stirring for a further 10 minutes, the precipitate was collected by suction filtration and dried under vacuum to yield 2,3-dichloro-6-nitrobenzaldehyde, 9.98 g (40%), essentially free of isomers.

후처리

  1. filtrationthe precipitate collected by filtration
  2. dissolutionThis was dissolved in diethyl ether (400 mL)
  3. washthe solution washed with water and saturated sodium carbonate
  4. dry with materialdried (MgSO4)
  5. concentrationconcentrated
  6. dissolutionThe residue was re-dissolved in the minimum amount of hot diethyl ether
  7. additionpoured quickly into vigorously stirred petrol (1 L)
  8. stirringAfter stirring for a further 10 minutes
  9. filtrationthe precipitate was collected by suction filtration
  10. customdried under vacuum

출처 및 근거

ORD 기록
ord-4d805f135fb64ccb8ca0b8cf87bb4f3f
출처 데이터셋
uspto-grants-2013_09
특허 번호
US08530651B2

연결된 노트

불러오는 중…