홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Nitric Acid → 2-Amino-4,6-bis(2-methylbutan-2-yl)phenol

HRID 413656
인쇄

반응식

HRID 413656 반응식
[C:1]([C:6]1[CH:11]=[C:10]([C:12]([CH2:15][CH3:16])([CH3:14])[CH3:13])[CH:9]=[CH:8][C:7]=1[OH:17])([CH2:4][CH3:5])([CH3:3])[CH3:2].[N+:18]([O-])(O)=O.C([O-])=O.[K+]>O.C(OCCC)(=O)C.N([O-])=O.[Na+]>[NH2:18][C:8]1[CH:9]=[C:10]([C:12]([CH2:15][CH3:16])([CH3:14])[CH3:13])[CH:11]=[C:6]([C:1]([CH2:4][CH3:5])([CH3:3])[CH3:2])[C:7]=1[OH:17]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 3

HCID 944Nitric AcidHCID 84552,4-Di-tert-pentylphenolHCID 2735122Potassium Formate

생성물 1

HCID 149180002-Amino-4,6-bis(2-methylbutan-2-yl)phenol수율 86.1%

시약·촉매·용매 3

HCID 23668193Sodium Nitrite촉매HCID 962Water용매3회
HCID 7997Propyl Acetate용매2회

실험 절차

2,4-Di-tert-pentylphenol (93.8 g, 0.4 mol), sodium nitrite (0.6 g, 0.009 mol), 60 mL of water, and 300 mL of propyl acetate were stirred mechanically in a one liter flask at 15-20°. Nitric acid (37.8 g of 70% acid, 0.42 mol) was added slowly via dropping funnel over 30 min keeping the temperature between 25 and 300. The mixture was then stirred vigorously for an additional hour before draining off the lower aqueous phase. The organic layer was washed with a solution of 21 g of sodium bicarbonate in 300 mL of water, passed through 9 g of activated charcoal, and concentrated under reduced pressure to an oil. Palladium catalyst (5 g of 5% Pd/C, 50% wet with water) was added to the oily nitrophenol dissolved in 240 mL of isopropyl alcohol. The mixture was heated with a 55° water bath before slowly adding over 1 h a solution of potassium formate (135 g, 1.6 mol) in 130 mL of water while keeping the temperature under 65°. After stirring an additional hour at 55-60°, the mixture was diluted with 300 mL of propyl acetate and 200 mL of warm water and filtered to remove catalyst. The catalyst was washed with 75 mL of propyl acetate and 75 mL of water. The combined propyl acetate layer was separated, washed with water and then brine, concentrated, and diluted with 200 mL of heptane to crystallize the product. After filtering and drying, 85.9 g (86%) of 2-amino-4,6-di-tert-pentylphenol were obtained.

후처리

  1. customover 30 min
  2. washThe organic layer was washed with a solution of 21 g of sodium bicarbonate in 300 mL of water
  3. concentrationconcentrated under reduced pressure to an oil
  4. additionPalladium catalyst (5 g of 5% Pd/C, 50% wet with water) was added to the oily nitrophenol
  5. dissolutiondissolved in 240 mL of isopropyl alcohol
  6. temperatureThe mixture was heated with a 55° water bath
  7. customunder 65°
  8. stirringAfter stirring an additional hour at 55-60°
  9. filtrationfiltered
  10. customto remove catalyst
  11. washThe catalyst was washed with 75 mL of propyl acetate and 75 mL of water
  12. customThe combined propyl acetate layer was separated
  13. washwashed with water
  14. concentrationbrine, concentrated
  15. additiondiluted with 200 mL of heptane
  16. customto crystallize the product
  17. filtrationAfter filtering
  18. customdrying

출처 및 근거

ORD 기록
ord-6cf20a4539964ea58c9bc16ab787bc93
출처 데이터셋
uspto-grants-2003_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06569612B1

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트