Iodine → HCID 178445097, 화합물

HRID 414670

반응식

HRID 414670 반응식
[Mg:1].II.C([Cl:8])CCC.[CH3:9][CH:10]([CH2:13][CH2:14][CH3:15])[CH2:11][OH:12]>CCCCCCCCC(C)C>[CH3:9][CH:10]([CH2:13][CH2:14][CH3:15])[CH2:11][O:12][Mg:1][Cl:8]

참가 물질

6

반응물 4

HCID 807Iodine2회HCID 77452-Methyl-1-pentanolHCID 8005Butyl ChlorideHCID 5462224Magnesium3회

생성물 1

HCID 178445097HCID 178445097, 화합물

시약·촉매·용매 1

HCID 234152-Methyldecane용매2회

실험 절차

Following the procedure of Example 1, 24.3 gm of magnesium metal chips were placed in a 3 necked 3 liter reactor with 0.25 g I2 crystals and 1500 ml of Isopar G solvent. A fraction of isoparaffinic hydrocarbons (Isopar G) having a boiling range of 157° to 176° C. The magnesium was iodine-activated by heating under argon and at reflux for 90 minutes. The activated magnesium metal slurry in Isopar G was then reacted with 104 ml of n-butyl chloride (lM) at the solvent reflux temperature. After two hours of reaction, 125 ml of 2-methyl-1-pentanol was added slowly with good agitation. The thick reaction slurry was agitated at reflux for two hours. Because of the viscous nature of the thick slurry, it was difficult to filter when it was hot. Therefore, the solvent was removed under reduced pressure at 90°-100° C. The dried solid obtained was not a powder, but sticky gray flakes. Dried product was analyzed and found to contain 15.21% Mg; 58.95%

후처리

  1. temperatureby heating under argon
  2. temperatureat reflux for 90 minutes
  3. temperaturereflux temperature
  4. additionwas added slowly with good agitation
  5. temperatureat reflux for two hours
  6. filtrationto filter when it
  7. customTherefore, the solvent was removed under reduced pressure at 90°-100° C
  8. customThe dried solid obtained

출처 및 근거

ORD 기록
ord-957e6e3651fb4d928c6a2e4935368d59
출처 데이터셋
uspto-grants-1988_12
특허 번호
US04792640

연결된 노트

불러오는 중…