홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Ethanol → N-[(4,6-dimethyl-2-oxo-1,2-dihydro-3-pyridinyl)methyl]-1-(1-methylethyl)-1H-indole-4-carboxamide

HRID 42414
인쇄

반응식

HRID 42414 반응식
C(O)C.Br[C:5]1[CH:6]=[C:7]([C:17]([NH:19][CH2:20][C:21]2[C:22](=[O:29])[NH:23][C:24]([CH3:28])=[CH:25][C:26]=2[CH3:27])=[O:18])[C:8]2[CH:9]=[CH:10][N:11]([CH:14]([CH3:16])[CH3:15])[C:12]=2[CH:13]=1>[Pd].O1CCCC1>[CH3:27][C:26]1[CH:25]=[C:24]([CH3:28])[NH:23][C:22](=[O:29])[C:21]=1[CH2:20][NH:19][C:17]([C:7]1[C:8]2[CH:9]=[CH:10][N:11]([CH:14]([CH3:16])[CH3:15])[C:12]=2[CH:13]=[CH:5][CH:6]=1)=[O:18]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 2

HCID 702Ethanol2회HCID 546701646-bromo-N-[(4,6-dimethyl-2-oxo-1,2-dihydro-3-pyridinyl)methyl]-1-(1-methylethyl)-1H-indole-4-carboxamide

생성물 1

HCID 66551041N-[(4,6-dimethyl-2-oxo-1,2-dihydro-3-pyridinyl)methyl]-1-(1-methylethyl)-1H-indole-4-carboxamide수율 60.2%

시약·촉매·용매 2

HCID 23938Palladium촉매
HCID 8028
Tetrahydrofuran
용매

실험 절차

To a flask under N2 atmosphere was added 10% palladium on carbon (0.028 g, 0.026 mmol) and ethanol (1 mL) (to wet catalyst). The flask was then charged with 6-bromo-N-[(4,6-dimethyl-2-oxo-1,2-dihydro-3-pyridinyl)methyl]-1-(1-methylethyl)-1H-indole-4-carboxamide (0.11 g, 0.264 mmol), ethanol (4 mL) and tetrahydrofuran (1 mL). The suspension was stirred under N2, then evacuated and refilled with H2 (balloon) and stirred overnight. The reaction was then placed back under N2 and diluted with 10% methanol/dichloromethane. Celite was added and the mixture was stirred for 15 min, filtered through a pad of Celite, washed with 10% methanol/dichloromethane, and concentrated. The residue was dissolved in dimethylsulfoxide and acetonitrile (with 0.1% trifluoroacetic acid and purified by Gilson prep HPLC (Sunfire 30×75 mm; Gradient B: 15-75%; A: water+0.1% TFA; B: acetonitrile+0.1% TFA). The resulting residue was dissolved in 10% methanol/dichloromethane and treated with Silicycle carbonate resin (1.5 g). The mixture was stirred for 30 min, filtered through Celite, washed with 10% methanol/dichloromethane, and concentrated. The residue was dissolved in dichloromethane and treated with methyl-t-butylether. The solvents were removed by via N2 stream and the solids dried in a vacuum oven at 45° C. for 18 h to give N-[(4,6-dimethyl-2-oxo-1,2-dihydro-3-pyridinyl)methyl]-1-(1-methylethyl)-1H-indole-4-carboxamide (56 mg, 0.159 mmol, 60% yield). 1H NMR (400 MHz, DMSO-d6) δ ppm 1.41-1.48 (m, 6H) 2.09-2.15 (m, 3H) 2.24 (s, 3H) 4.35 (d, J=5.31 Hz, 2H) 4.79 (quin, J=6.63 Hz, 1H) 5.88 (s, 1H) 6.84 (d, J=3.03 Hz, 1H) 7.11-7.18 (m, 1H) 7.39 (d, J=6.57 Hz, 1H) 7.58 (d, J=3.28 Hz, 1H) 7.65 (d, J=8.34 Hz, 1H) 8.08 (t, J=5.31 Hz, 1H) 11.54 (br. s., 1H). MS (ES) [M+H]+ 338.6.

후처리

  1. customevacuated
  2. additionrefilled with H2 (balloon)
  3. stirringstirred overnight
  4. additiondiluted with 10% methanol/dichloromethane
  5. additionCelite was added
  6. stirringthe mixture was stirred for 15 min
  7. filtrationfiltered through a pad of Celite
  8. washwashed with 10% methanol/dichloromethane
  9. concentrationconcentrated
  10. dissolutionThe residue was dissolved in dimethylsulfoxide
  11. customacetonitrile (with 0.1% trifluoroacetic acid and purified by Gilson prep HPLC (Sunfire 30×75 mm
  12. dissolutionThe resulting residue was dissolved in 10% methanol/dichloromethane
  13. additiontreated with Silicycle carbonate resin (1.5 g)
  14. stirringThe mixture was stirred for 30 min
  15. filtrationfiltered through Celite
  16. washwashed with 10% methanol/dichloromethane
  17. concentrationconcentrated
  18. dissolutionThe residue was dissolved in dichloromethane
  19. additiontreated with methyl-t-butylether
  20. customThe solvents were removed by via N2 stream
  21. customthe solids dried in a vacuum oven at 45° C. for 18 h

출처 및 근거

ORD 기록
ord-cd3788a959b7403b985f7b4f8e370a6d
출처 데이터셋
uspto-grants-2013_09
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08536179B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트