홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methanesulfonic Acid → 2,5-Diamino-benzenesulfonamide methanesulfonate

HRID 424178
인쇄

반응식

HRID 424178 반응식
[CH3:1][S:2]([OH:5])(=[O:4])=[O:3].C([NH:13][C:14]1[CH:19]=[CH:18][C:17]([N+:20]([O-])=O)=[CH:16][C:15]=1[S:23]([NH2:26])(=[O:25])=[O:24])C1C=CC=CC=1.O1CCCC1.[H][H]>[Pd].C(O)C.O>[CH3:1][S:2]([OH:5])(=[O:4])=[O:3].[NH2:13][C:14]1[CH:19]=[CH:18][C:17]([NH2:20])=[CH:16][C:15]=1[S:23]([NH2:26])(=[O:24])=[O:25]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 4

HCID 6395Methanesulfonic AcidHCID 8028TetrahydrofuranHCID 248583972-Benzylamino-5-nitro-benzenesulfonamideHCID 178418361HCID 178418361, 화합물

생성물 1

HCID 251646412,5-Diamino-benzenesulfonamide methanesulfonate수율 93%

시약·촉매·용매 3

HCID 23938
Palladium
촉매
2회
HCID 702Ethanol용매
HCID 962Water용매2회

반응 조건

온도
23 °C

실험 절차

Methanesulfonic acid (465 mL, 7.16 mol) was added slowly to a solution of 2-benzylamino-5-nitro-benzenesulfonamide (2.20 kg, 7.16 mol) and tetrahydrofuran (11.0 L). The resulting solution was added to a mixture of 10% palladium on carbon (220 g of 50% water wet catalyst) and water (1.1 L) in a hydrogenation reactor. The mixture was further diluted with absolute ethanol (21.0 L) and was then hydrogenated with 55 psi hydrogen at 50° C. for 21 h. Additional 10% palladium on carbon (55 g of 50% water wet catalyst) was added, and hydrogenation at 55 psi and 50° C. was continued for 22 h. The resulting suspension was diluted with water (1.1 L) and the suspension was then filtered through a pad of Celite. The filtrate was partially concentrated in vacuo and was then diluted with acetonitrile (15.4 L). The solution was again partially concentrated in vacuo and diluted with acetonitrile (15.4 L). The resulting suspension was partially concentrated in vacuo and was allowed to stir at 23° C. for 2 h. The suspension was filtered and the solid was then washed with acetonitrile (3 L). The solid was further dried in vacuo at 45° C. to afford the desired product, 2,5-diamino-benzenesulfonamide methanesulfonate (1.88 kg, 6.64 mol, 93%), as a purple solid. 1H NMR (400 MHz, DMSO-d6) δ: 2.34 (3H, s), 6.05 (2H, b), 6.87 (1H, d, J=8.6 Hz), 7.20 (1H, dd, J1=8.6 Hz, J2=2.3 Hz), 7.38 (2H, s), 7.53 (1H, d, J=2.3 Hz), 9.62 (3H, b). LC-MS (ESI) calcd for C6H9NO2S 187.04, found 187.9 [M+H+].

후처리

  1. filtrationthe suspension was then filtered through a pad of Celite
  2. concentrationThe filtrate was partially concentrated in vacuo
  3. additionwas then diluted with acetonitrile (15.4 L)
  4. concentrationThe solution was again partially concentrated in vacuo
  5. additiondiluted with acetonitrile (15.4 L)
  6. concentrationThe resulting suspension was partially concentrated in vacuo
  7. filtrationThe suspension was filtered
  8. washthe solid was then washed with acetonitrile (3 L)
  9. customThe solid was further dried in vacuo at 45° C.

출처 및 근거

ORD 기록
ord-4743c1212d804f5fbd8418ebce811d27
출처 데이터셋
uspto-grants-2012_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08101800B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트