홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methanol → p-Tert-butoxystyrene p-tert-butylstyrene

HRID 430914
인쇄

반응식

HRID 430914 반응식
[C:1]([O:5][C:6]1[CH:13]=[CH:12][C:9]([CH:10]=[CH2:11])=[CH:8][CH:7]=1)([CH3:4])([CH3:3])[CH3:2].[C:14]([C:18]1[CH:25]=[CH:24][C:21]([CH:22]=[CH2:23])=[CH:20][CH:19]=1)([CH3:17])([CH3:16])[CH3:15].CO>CC(C)=O>[C:1]([O:5][C:6]1[CH:7]=[CH:8][C:9]([CH:10]=[CH2:11])=[CH:12][CH:13]=1)([CH3:4])([CH3:2])[CH3:3].[C:14]([C:18]1[CH:19]=[CH:20][C:21]([CH:22]=[CH2:23])=[CH:24][CH:25]=1)([CH3:17])([CH3:15])[CH3:16]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 887MethanolHCID 156274-tert-ButylstyreneHCID 5775311-(Tert-butoxy)-4-ethenylbenzene

생성물 1

HCID 86759274p-Tert-butoxystyrene p-tert-butylstyrene

시약·촉매·용매 1

HCID 180Acetone용매

실험 절차

With the use of 100 g (0.567 mole) of p-tert-butoxystyrene and 5.3 g (0.03 mole) of p-tert-butylstyrene, the same polymerization reaction and after-treatment as described in Production Example 2-(1) were conducted. Then, the resulting viscous resinous material was dissolved in 300 g of acetone and poured into 2000 ml of 50% aqueous methanol solution and precipitated resin was subjected to decantation. This process step was conducted further twice, and the resultant was dried under reduced pressure to give 94.5 g of poly(p-tert-butoxystyrene/p-tert-butylstyrene) as white powders. Then, 70 g of the polymer was subjected to the same reaction and after-treatment as described in Production Example 9-(1) to give 48.5 g of poly(p-hydroxystyrene/p-tert-butylstyrene) as white powders. A ratio of p-hydroxystyrene unit and p-tert-butylstyrene unit was about 94:6 by 1HNMR. Mw: about 16000, Mw/Mn: 1.29 (GPC method: polystyrene as standard).

후처리

  1. customprecipitated resin
  2. customthe resultant was dried under reduced pressure

출처 및 근거

ORD 기록
ord-fa3f744e22c74ba58e4a85ae1a5fdd17
출처 데이터셋
uspto-grants-2003_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06656660B1

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트