홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Butyl bromide → Tri-n-octyl-n-butylphosphonium bromide

HRID 435566
인쇄

반응식

HRID 435566 반응식
[CH2:1]([P:9]([CH2:18][CH2:19][CH2:20][CH2:21][CH2:22][CH2:23][CH2:24][CH3:25])[CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH2:15][CH2:16][CH3:17])[CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH3:8].[Br:26][CH2:27][CH2:28][CH2:29][CH3:30]>>[Br-:26].[CH2:18]([P+:9]([CH2:1][CH2:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH3:8])([CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH2:15][CH2:16][CH3:17])[CH2:27][CH2:28][CH2:29][CH3:30])[CH2:19][CH2:20][CH2:21][CH2:22][CH2:23][CH2:24][CH3:25]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

3

반응물 2

HCID 8002Butyl bromideHCID 20851Trioctylphosphine

생성물 1

HCID 22731140Tri-n-octyl-n-butylphosphonium bromide

실험 절차

Tri-n-octyl-n-butylphosphonium bromide is prepared by slowing dripping tri-(n-octyl)phosphine (740 grams) into refluxing 1-bromobutane (500 grams) in a nitrogen atmosphere. Reflux is continued 1 hour after final addition then the solution is cooled with stirring for about 18 hours, followed by vacuum removal of excess 1-bromobutane at 60° C. This product, 1210 grams from two successive preparations, is added to 880 grams of sodium 3,5-dicarbomethoxybenzenesulfonate in 2500 ml. of water and stirred for at least 1 hour at 85° C. then the heat is removed and the oil-in-water mixture is stirred for about 18 hours. The oil layer is separated from the water, rinsed with 1000 ml. of water and dried at about 80° C. at a pressure less than 2 torr for 18 hours. This product, an oil, is tri-n-octyl-n-butylphosphonium 3,5-dicarbomethoxybenzenesulfonate with 4.2% phosphorous and 4.7% sulfur by analysis.

후처리

  1. temperatureReflux
  2. additionafter final addition
  3. temperaturethe solution is cooled
  4. customfollowed by vacuum removal of excess 1-bromobutane at 60° C
  5. additionThis product, 1210 grams from two successive preparations, is added to 880 grams of sodium 3,5-dicarbomethoxybenzenesulfonate in 2500 ml
  6. stirringof water and stirred for at least 1 hour at 85° C.
  7. customthe heat is removed
  8. stirringthe oil-in-water mixture is stirred for about 18 hours
  9. customThe oil layer is separated from the water
  10. washrinsed with 1000 ml
  11. dry with materialof water and dried at about 80° C. at a pressure less than 2 torr for 18 hours

출처 및 근거

ORD 기록
ord-c2c4bc6bda874a5fb100a3f0c34794ee
출처 데이터셋
uspto-grants-1977_02
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04006123

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트