홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Tetrahydrofuran → cis-2,3,3a,4,7,7a-Hexahydro-1h-isoindole

HRID 446713
인쇄

반응식

HRID 446713 반응식
[H-].[H-].[H-].[H-].[Li+].[Al+3].C1COCC1.[C:12]1(=O)[NH:16][C:15](=O)[CH:14]2[CH2:18][CH2:19][CH:20]=[CH:21][CH:13]12>>[CH2:15]1[C@@H:14]2[C@@H:13]([CH2:21][CH:20]=[CH:19][CH2:18]2)[CH2:12][NH:16]1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 3

HCID 8028TetrahydrofuranHCID 152779823a,4,5,7a-Tetrahydro-1H-isoindole-1,3(2H)-dioneHCID 21226445Aluminium lithium hydride

생성물 1

HCID 16765331cis-2,3,3a,4,7,7a-Hexahydro-1h-isoindole

반응 조건

온도
60 °C

실험 절차

To a solution of 1 M LAH in THF (800 mL; 0.8 mole; 2.3 eq) at rt was added, portionwise, tetrahydrophthalimide (52.6 g; 0.348 mole; 1 eq). The reaction mixture was stirred at 60° C. for 16 hours, then cooled to RT and quenched carefully with sequential addition of 30 mL of water, 30 mL of THF, 15% aqueous KOH (30 mL), and water (100 mL). The mixture was diluted with 135 mL of ether, stirred at RT for 1 hour, and filtered through a pad of diatomaceous earth on a 600 mL fritted glass filter funnel, washing the pad with 400 mL of DCM. The filtrate was concentrated in vacuo to yield (3aR,7aS)-2,3,3a,4,7,7a-hexahydro-1H-isoindole as an oil, which was used directly in the next reaction as is.

후처리

  1. temperaturecooled to RT
  2. customquenched carefully with sequential addition of 30 mL of water, 30 mL of THF, 15% aqueous KOH (30 mL), and water (100 mL)
  3. additionThe mixture was diluted with 135 mL of ether
  4. stirringstirred at RT for 1 hour
  5. filtrationfiltered through a pad of diatomaceous earth on a 600 mL fritted glass
  6. filtrationfilter funnel
  7. washwashing the pad with 400 mL of DCM
  8. concentrationThe filtrate was concentrated in vacuo

출처 및 근거

ORD 기록
ord-38a7a8b073a74997ae17984c7f7d16be
출처 데이터셋
uspto-grants-2013_07
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08481524B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트