홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Diisopropylamine → 3-Pyrazin-2-yl-propionic acid ethyl ester

HRID 457707
인쇄

반응식

HRID 457707 반응식
C([Li])CCC.C(NC(C)C)(C)C.[Li+].CC([N-]C(C)C)C.[CH3:21][C:22]1[CH:27]=[N:26][CH:25]=[CH:24][N:23]=1.Br[CH2:29][C:30]([O:32][C:33](C)(C)[CH3:34])=[O:31]>C1COCC1>[CH2:33]([O:32][C:30](=[O:31])[CH2:29][CH2:21][C:22]1[CH:27]=[N:26][CH:25]=[CH:24][N:23]=1)[CH3:34]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 5

HCID 7912DiisopropylamineHCID 79762-MethylpyrazineHCID 79177tert-Butyl bromoacetateHCID 2724682Lithium diisopropylamideHCID 178418339Butyllithium

생성물 1

HCID 202132743-Pyrazin-2-yl-propionic acid ethyl ester수율 49.9%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매3회

반응 조건

온도
-35 °C

실험 절차

Butyl lithium (2.5M in hexane—2560 mL) was added within 2 hours into a 10 L flask charged with THF (3350 mL) and diisopropylamine (658 g) while the temperature was maintained at 0–5° C. with an ice bath. The LDA solution was then precooled to −50° C. and a mixture of methylpyrazine (606 g) and THF (590 mL) was added within 2 hours under vigorous stirring at −40 to −30° C. The deep red anion solution is then pumped to a cooled (−60° C.) mixture of tert-butyl bromoacetate (1255 g) and THF (3360 mL) in a 20 L reactor. During the addition of the anion solution, the temperature in the reaction vessel did not exceed −55° C. After the addition, the mixture is stirred for further 30 min at −55° C. and then transferred to a 30 L reactor (the transesterification and removal of solvents can be done for two runs at once). A solution of sodium ethylate (142 g) dissolved in EtOH (2200 mL) was then added to the orange mixture and about 12 L of solvents were distilled off until a temperature of 80° C. was reached in the distillation head and 100° C. in the boiling liquid. The mixture was cooled to approximately 30° C. and then toluene (840 mL), AcOEt (840 mL), and water (1180 mL) were added. After separation of the phases, the organic layer was extracted three times with AcOEt (420 mL) and toluene (170 mL) each. The combined organic phases were then concentrated in vacuo and the residue was distilled over a Vigreux column (bp 115 to 130° C. @ 0.07 mbar) giving the title compound (579 g).

후처리

  1. temperaturewas maintained at 0–5° C. with an ice bath
  2. customwas then precooled to −50° C.
  3. additionwas added within 2 hours
  4. temperaturea cooled
  5. additionDuring the addition of the anion solution
  6. customdid not exceed −55° C
  7. additionAfter the addition
  8. stirringthe mixture is stirred for further 30 min at −55° C.
  9. customtransferred to a 30 L reactor
  10. custom(the transesterification and removal of solvents
  11. dissolutionA solution of sodium ethylate (142 g) dissolved in EtOH (2200 mL)
  12. additionwas then added to the orange mixture and about 12 L of solvents
  13. distillationwere distilled off until a temperature of 80° C.
  14. customwas reached in the distillation head and 100° C. in the boiling liquid
  15. temperatureThe mixture was cooled to approximately 30° C.
  16. additiontoluene (840 mL), AcOEt (840 mL), and water (1180 mL) were added
  17. customAfter separation of the phases
  18. extractionthe organic layer was extracted three times with AcOEt (420 mL) and toluene (170 mL) each
  19. concentrationThe combined organic phases were then concentrated in vacuo
  20. distillationthe residue was distilled over a Vigreux column (bp 115 to 130° C. @ 0.07 mbar)

출처 및 근거

ORD 기록
ord-2b8e735e905d45eb883af152e884d5bf
출처 데이터셋
uspto-grants-2007_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07189713B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트