Tetramethylammonium Hydroxide Pentahydrate → Chromium

참여 물질

반응 조건

반응 단계

We have found that the presence of specific additives, not generally recognised as brighteners, in 2:1 chromium (III) chloride hexahydrate-choline chloride can significantly brighten the electrodeposit. For example when 10% of choline chloride is replaced by tetraethylammonium fluoride dihydrate or tetramethylammonium hydroxide pentahydrate thin semi-bright pale blue chromium deposits can be obtained. Approximately 6 ml of 2:1 chromium (III) chloride hexahydrate-[choline chloride (90%) tetraethylammonium fluoride dihydrate (10%)] was prepared by combining the reactants in a beaker and heating at 80° C. The green liquid was poured into an electrochemical cell (internal diameter of 23 mm) held in an oil bath at 60° C. Mild steel (50 mm by 10 mm and 1 mm thick), cleaned in the usual way, was fixed to the inside edge of the cell opposite a nickel counter electrode. The mild steel plate and counter-electrode were then connected to the negative and positive terminals respectively of a Thurlby Thander power pack. Using current densities between 8 and 16 mAcm−2 and deposition times between 10 and 30 minutes semi-bright chromium deposits were obtained. The procedure was repeated using approximately 6 ml of 2:1 chromium (III) chloride hexahydrate-[choline chloride (90%) tetramethylammonium hydroxide pentahydrate (10%)]. With a current density of 2 mAcm−2 thin pale blue semi-bright homogenous chromium deposits were obtained after 30 minutes.

출처 및 근거