Methanol → Isobutyl Methacrylate

참여 물질

반응 단계

Further, on the surface of the resulting material are spread an ink consisting of polyurethane elastomer (10%), which is obtained from polycaprolactone glycol, dicyclohexylmethane-4,4'-diisocyanate and 1-amino-3-aminomethyl-3,5,5-trimethylcyclohexane (isophoronediamine), a brown pigment (3%), dimethylformamide (24%), methanol (28%), toluene (8%), isopropanol (5%), acetone (12%) and cyclohexanone (10%) in an amount of 16 g/m2 based on the solids content, and the resulting material is embossed with sheepskin pattern. Then, on the resulting material is spread a dispersion solution consisting of an acryl-modified polyurethane resin (20 parts), which is obtained by emulsion polymerization of isobutyl methacrylate (20 parts) in an ion-exchanged water (30 parts) in the presence of a thermosetting anionic polyurethane emulsion (50 parts), and water (80 parts) in an amount of 8 g/m2 based on the solids content. The material is dried to give a leather-like sheet material [J]. The substrate of the leather-like sheet has a thickness of 1.8 mm and a density of 0.41 g/cm3, and the surface layer is a nonporous layer with a thickness of 16 . Young's modulus of the resin composed of the surface layer is 9.5 kg/mm2.

출처 및 근거