Hydrofluoric Acid → 4-(1-Chloro-1,2,2,2-tetrafluoroethoxy)chlorobenzene

HRID 4740

반응식

HRID 4740 반응식
[Cl:1][C:2](Cl)([O:7][C:8]1[CH:13]=[CH:12][C:11]([Cl:14])=[CH:10][CH:9]=1)[C:3]([F:6])([F:5])[F:4].[Sb](Cl)(Cl)(Cl)(Cl)Cl.[FH:22]>>[Cl:1][C:2]([F:22])([O:7][C:8]1[CH:13]=[CH:12][C:11]([Cl:14])=[CH:10][CH:9]=1)[C:3]([F:6])([F:5])[F:4]

참가 물질

4

실험 절차

A 500 ml polytetrafluoroethylene reactor equipped with stirrer, thermometer and reflux condenser is charged with 55.9 g (0.2 mol) of 4-(1,1-dichloro-2,2,2-trifluoroethoxy)chlorobenzene in 100 ml of hydrogen fluoride. 3.0 g (0.01 mol; corresponding to 5 mol%) of antimony pentachloride are added at a temperature in the range from -5° C. to 0° C. The resultant hydrogen chloride is removed from the reactor through the reflux condenser. After 20 minutes at 0° C., the evolution of hydrogen chloride ceases. Excess hydrogen fluoride is removed by distillation, the residue is dissolved in 200 ml of methylene chloride and the solution is extracted with water. The organic phase is separated by distillation, affording 47.3 g (89.8% of theory) of 4-(1-chloro-1,2,2,2-tetrafluoroethoxy)chlorobenzene. Boiling point 181° C., nD25 =1.4362.

후처리

  1. customA 500 ml polytetrafluoroethylene reactor equipped with stirrer
  2. temperaturethermometer and reflux condenser
  3. customThe resultant hydrogen chloride is removed from the reactor through the reflux condenser
  4. customExcess hydrogen fluoride is removed by distillation
  5. dissolutionthe residue is dissolved in 200 ml of methylene chloride
  6. extractionthe solution is extracted with water
  7. customThe organic phase is separated by distillation

출처 및 근거

ORD 기록
ord-30de9da655d044c9895a8b402380e49a
출처 데이터셋
uspto-grants-1988_02
특허 번호
US04727187

연결된 노트

불러오는 중…