홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Pyridine → 6-chloro-2-[3-chloro-(3-chloro-2-pyridinyl)-1H-pyrazol-5-yl]-8-methyl-4H-3,1-benzoxazin-4-one

HRID 475474
인쇄

반응식

HRID 475474 반응식
CS(Cl)(=O)=O.ClC1(C(O)=O)N(C2C(Cl)=CC=CN=2)NC=C1.[Cl:22][C:23]1[CH:27]=[C:26]([C:28]([OH:30])=O)[N:25]([C:31]2[C:36]([Cl:37])=[CH:35][CH:34]=[CH:33][N:32]=2)[N:24]=1.N1C=CC=CC=1.[NH2:44][C:45]1[C:53]([CH3:54])=[CH:52][C:51]([Cl:55])=[CH:50][C:46]=1[C:47](O)=[O:48]>C(#N)C.O>[Cl:55][C:51]1[CH:52]=[C:53]([CH3:54])[C:45]2[N:44]=[C:28]([C:26]3[N:25]([C:31]4[C:36]([Cl:37])=[CH:35][CH:34]=[CH:33][N:32]=4)[N:24]=[C:23]([Cl:22])[CH:27]=3)[O:30][C:47](=[O:48])[C:46]=2[CH:50]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

8

반응물 5

HCID 1049Pyridine2회HCID 31297Methanesulfonyl chloride2회HCID 116440442-Amino-5-chloro-3-methylbenzoic acidHCID 211073323-Chloro-1-(3-chloro-2-pyridinyl)-1H-pyrazole-5-carboxylic acidHCID 712368455-chloro-1-(3-chloro-2-pyridinyl)-1H-pyrazole-5-carboxylic acid

생성물 1

HCID 21113390
6-chloro-2-[3-chloro-(3-chloro-2-pyridinyl)-1H-pyrazol-5-yl]-8-methyl-4H-3,1-benzoxazin-4-one

시약·촉매·용매 2

HCID 962Water용매HCID 6342Acetonitrile용매4회

반응 조건

온도
-5 °C

실험 절차

Methanesulfonyl chloride (1.0 mL, 1.5 g 13 mmol) was dissolved in acetonitrile (10 mL) and the mixture was cooled to −5° C. A solution of 5-chloro-1-(3-chloro-2-pyridinyl)-1H-pyrazole-5-carboxylic acid (i.e. the carboxylic acid product of Example 8, Step D) (2.58 g, 10 mmol) and pyridine (1.4 mL, 1.4 g, 17 mmol) in acetonitrile (10 mL) was added dropwise over 5 minutes at −5 to 0° C. A slurry formed during the addition. The mixture was stirred 5 minutes at this temperature, and then 2-amino-3-methyl-5-chlorobenzoic acid (i.e. the product from Example 6, Step A) (1.86 g, 10 mmol) was added all at once. Then a solution of pyridine (2.8 mL, 2.7 g, 35 mmol) in acetonitrile (10 mL) was added dropwise in 5 min at −5 to 0° C. The mixture was stirred 15 minutes at −5 to 0° C., and then methanesulfonyl chloride (1.0 mL, 1.5 mL, 13 mmol) in acetonitrile (5 mL) was added dropwise in 5 min at −5 to 0° C. The reaction mixture was stirred 15 minutes at this temperature, then allowed to warm slowly to room temperature, and stirred 4 h. Water (15 mL) was added dropwise, and the mixture was stirred 15 minutes. Then the mixture was filtered, and the solids were washed with 2:1 acetonitrile-water (3×3 mL), then with acetonitrile 2×5 mL), and dried under nitrogen to afford the title product as a pale yellow powder, 3.83 g (94.0% crude yield), melting at 199-201° C. HPLC or the product using a Zorbax® RX-C8 chromatography column (4.5 mm×25 cm, eluent 25-95% acetonitrile/pH 3 water) showed a major peak corresponding to the title compound and having 97.8% of total chromatogram peak area.

후처리

  1. customA slurry formed during the addition
  2. stirringThe mixture was stirred 15 minutes at −5 to 0° C.
  3. stirringThe reaction mixture was stirred 15 minutes at this temperature
  4. temperatureto warm slowly to room temperature
  5. stirringstirred 4 h
  6. stirringthe mixture was stirred 15 minutes
  7. filtrationThen the mixture was filtered
  8. washthe solids were washed with 2:1 acetonitrile-water (3×3 mL)
  9. dry with materialwith acetonitrile 2×5 mL), and dried under nitrogen

출처 및 근거

ORD 기록
ord-dbf4a905297145a18bf23746083419a9
출처 데이터셋
uspto-grants-2014_01
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08637552B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트