홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Hydrogen Peroxide → Sec.-butyl-di-n-octyl phosphine oxide

HRID 476778
인쇄

반응식

HRID 476778 반응식
[OH:1]O.[CH:3]([P:7]([CH2:16][CH2:17][CH2:18][CH2:19][CH2:20][CH2:21][CH2:22][CH3:23])[CH2:8][CH2:9][CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH3:15])([CH2:5][CH3:6])[CH3:4]>O>[CH:3]([P:7](=[O:1])([CH2:16][CH2:17][CH2:18][CH2:19][CH2:20][CH2:21][CH2:22][CH3:23])[CH2:8][CH2:9][CH2:10][CH2:11][CH2:12][CH2:13][CH2:14][CH3:15])([CH2:5][CH3:6])[CH3:4]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 784Hydrogen PeroxideHCID 14121815Sec.-butyl-di-n-octyl phosphine

생성물 1

HCID 14094216Sec.-butyl-di-n-octyl phosphine oxide

시약·촉매·용매 1

HCID 962Water용매

반응 조건

온도
70 °C

실험 절차

40 g H2O2 (0.35 mol, 30% solution) was added dropwise while cooling with water and with intense agitation to 80 g (0.25 mol) sec.-butyl-di-n-octyl phosphine in a 500 ml-double-walled vessel. After all had been added, the reaction solution was heated to 70° C. over a period of 30 minutes, while stirring was interrupted. An aqueous phase which deposited on the bottom of the vessel was separated. It was admixed with 4.5 ml sodium carbonate solution (30 g/l) and the pH increased from 5.6 to 9.2. The whole was stirred over a period of 1 hour at 80° C. and allowed to deposit. The aqueous phase was separated and the crude product was distilled in vacuum.

후처리

  1. additionAfter all had been added
  2. customwas separated
  3. temperaturethe pH increased from 5.6 to 9.2
  4. stirringThe whole was stirred over a period of 1 hour at 80° C.
  5. customThe aqueous phase was separated
  6. distillationthe crude product was distilled in vacuum

출처 및 근거

ORD 기록
ord-bf0cb5c36d3f4a46865e800160090ebd
출처 데이터셋
uspto-grants-1989_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04885393

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트