홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Ethanol → Ethyl (3-phenoxyphenyl)acetate

HRID 477339
인쇄

반응식

HRID 477339 반응식
[O:1]([C:8]1[CH:9]=[C:10]([CH2:14][C:15]([OH:17])=[O:16])[CH:11]=[CH:12][CH:13]=1)[C:2]1[CH:7]=[CH:6][CH:5]=[CH:4][CH:3]=1.S(=O)(=O)(O)O.[CH2:23](O)[CH3:24]>>[O:1]([C:8]1[CH:9]=[C:10]([CH2:14][C:15]([O:17][CH2:23][CH3:24])=[O:16])[CH:11]=[CH:12][CH:13]=1)[C:2]1[CH:3]=[CH:4][CH:5]=[CH:6][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 3

HCID 702EthanolHCID 1118Sulfuric AcidHCID 1417493-Phenoxyphenylacetic acid

생성물 1

HCID 12509092Ethyl (3-phenoxyphenyl)acetate

반응 조건

온도
20 °C

실험 절차

(3-Phenoxyphenyl)acetic acid (11.5 g) and 36N aqueous sulphuric acid solution (3 cc) in ethanol (200 cc) are brought to boiling for 72 hours. After being cooled to approximately 20° C., the reaction mixture is concentrated to dryness at 50° C. under reduced pressure (20 mm Hg; 2.7 kPa). The oil is dissolved in dichloromethane (300 cc); the organic phase is washed with water (150 cc), dried over anhydrous magnesium sulphate, filtered and concentrated to dryness at 40° C. under reduced pressure (20 mm Hg; 2.7 kPa). The residue is dissolved in a mixture (20 cc) of cyclohexane and ethyl acetate (50:50 by volume), and the solution is poured onto silica (400 g) contained in a column 5 cm in diameter. Elution is performed with a mixture of cyclohexane and ethyl acetate (50:50 by volume), and the corresponding eluate is concentrated to dryness at 40° C. under reduced pressure (20 mm Hg; 2.7 kPa). Ethyl (3-phenoxyphenyl)acetate (7.4 g) is thereby obtained, and is used in the crude state in the subsequent syntheses.

후처리

  1. concentrationthe reaction mixture is concentrated to dryness at 50° C. under reduced pressure (20 mm Hg; 2.7 kPa)
  2. dissolutionThe oil is dissolved in dichloromethane (300 cc)
  3. washthe organic phase is washed with water (150 cc)
  4. dry with materialdried over anhydrous magnesium sulphate
  5. filtrationfiltered
  6. concentrationconcentrated to dryness at 40° C. under reduced pressure (20 mm Hg; 2.7 kPa)
  7. dissolutionThe residue is dissolved in a mixture (20 cc) of cyclohexane and ethyl acetate (50:50 by volume)
  8. additionthe solution is poured onto silica (400 g)
  9. washElution
  10. additionis performed with a mixture of cyclohexane and ethyl acetate (50:50 by volume)
  11. concentrationthe corresponding eluate is concentrated to dryness at 40° C. under reduced pressure (20 mm Hg; 2.7 kPa)

출처 및 근거

ORD 기록
ord-70ed4016b51a42b78a92452f147dcbd8
출처 데이터셋
uspto-grants-1989_12
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04886835

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트