홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Formaldehyde → 4-Fluoro-2-hydroxybenzaldehyde

HRID 478287
인쇄

반응식

HRID 478287 반응식
[CH3:1][O-:2].[Mg+2].C[O-].[F:6][C:7]1[CH:8]=[C:9]([OH:13])[CH:10]=[CH:11][CH:12]=1.C=O>CO.C1(C)C=CC=CC=1>[F:6][C:7]1[CH:12]=[CH:11][C:10]([CH:1]=[O:2])=[C:9]([OH:13])[CH:8]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 712FormaldehydeHCID 97433-FluorophenolHCID 164537Magnesium methoxide

생성물 1

HCID 27792684-Fluoro-2-hydroxybenzaldehyde수율 46.2%

시약·촉매·용매 2

HCID 887Methanol용매HCID 1140Toluene용매

반응 조건

온도
25 °C

실험 절차

Magnesium methoxide (13 g, 150 mmol, 6% in methanol) in methanol (50 mL) was treated with 3-fluorophenol (22.4 g, 200 mmol). The solution was heated to reflux and approximately half the methanol distilled off. Toluene (300 mL) was added and the reaction mixture was heated with azeotropic removal of solvent until the temperature of the distillate reached 95° C. A slurry of paraformaldehyde powder (22 g, 720 mmol) in toluene (20 mL) was added in small portions over 1 hour to the reaction with concurrent removal of volatile materials by distillation. The mixture was stirred was at 95° C. for 1 hour, cooled to 25° C., quenched by slow addition to 10% sulfuric acid and stirred at 30-40° C. for 2 hours. The layers were separated and the aqueous portion extracted with toluene (2×50 mL). The organic layers were combined, washed with 10% sulfuric acid, washed with water, dried with sodium sulfate, filtered and the solvent was evaporated. The resulting yellow oil was purified by flash chromatography over silica gel eluting with hexane:ethyl acetate (5:1) to provide 9.7 g of the title compound as a white solid.

후처리

  1. temperatureThe solution was heated
  2. temperatureto reflux
  3. distillationapproximately half the methanol distilled off
  4. additionToluene (300 mL) was added
  5. temperaturethe reaction mixture was heated with azeotropic removal of solvent until the temperature of the distillate
  6. customreached 95° C
  7. customquenched by slow addition to 10% sulfuric acid
  8. stirringstirred at 30-40° C. for 2 hours
  9. customThe layers were separated
  10. extractionthe aqueous portion extracted with toluene (2×50 mL)
  11. washwashed with 10% sulfuric acid
  12. washwashed with water
  13. dry with materialdried with sodium sulfate
  14. filtrationfiltered
  15. customthe solvent was evaporated
  16. customThe resulting yellow oil was purified by flash chromatography over silica gel eluting with hexane:ethyl acetate (5:1)

출처 및 근거

ORD 기록
ord-7828702f8551411ca2098c8bf270b5de
출처 데이터셋
uspto-grants-2003_11
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06642222B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트