홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.1
  1. 홈
  2. /반응

Acrylic Acid → Urea

HRID 482642
인쇄

반응식

HRID 482642 반응식
[C:1]([OH:5])(=O)[CH:2]=[CH2:3].[C:6](#[N:9])[CH:7]=[CH2:8].[C:10]([NH:14]C(C)(C)CS(O)(=O)=O)(=[O:13])C=C>O>[NH2:9][C:10]([NH2:14])=[O:13].[C:1]1([CH:2]=[CH:3][CH:8]=[C:7]([OH:13])[CH:6]=1)[OH:5]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 6581Acrylic AcidHCID 7855AcrylonitrileHCID 653602-Acrylamido-2-methyl-1-propanesulfonic acid

생성물 2

HCID 1176UreaHCID 5054Resorcinol

시약·촉매·용매 1

HCID 962Water용매2회

실험 절차

Thoroughly mixed were 50 parts of an anionic water-soluble polymer (a 20 wt. % aqueous solution; viscosity: 300 cps) having a monomer composition of 55 mole % acrylic acid, 40 mole % acrylonitrile and 5 mole % of 2-acrylamido-2-methylpropanesulfonic acid and obtained by radical-polymerizing the monomers in an aqueous system, 10 parts of urea, 1 part of resorcin and 250 parts of water. The pH of the resultant mixture was adjusted to 3.3 with a 20% aqueous NaOH solution. Then, as core materials, 200 parts of phenylxylylethane ("Hisol SAS-296", product of Nippon Petrochemical Co., Ltd.) containing 3 wt. % of Crystal Violet Lactone and 0.8 wt. % of Benzoyl Leuco Methylene Blue, both dissolved in the phenylxylylethane, were added. The resultant mixture was emulsified using a Homo-Mixer at 9,000 rpm. Three minutes later, there was obtained a stable o/w-type emulsion having an average droplet size of 4.0 micrometers. Twenty-five parts of formalin (a 37% aqueous solution of formaldehyde) were then added to the above system. The system was heated to 60° C. with stirring. While continuing the stirring, the system was held at this temperature for 4 hours to provide microcapsules having dense wall films, which were made of a urea-formaldehyde resin, around the core material. The system was then cooled, and a 28% aqueous ammonia solution was added little by little with stirring to raise the pH of the system to 8.5. Thus, the smell of formaldehyde was completely wiped off from the system. The thus-obtained microcapsule slurry had a solid content of 43 wt. % and a low viscosity of 85 cps. No substantial viscosity changes were observed on the slurry over a pH range of from pH 3.3 (at the time of condensation) to pH 8.5 (after removal of formaldehyde).

후처리

  1. additionThoroughly mixed

출처 및 근거

ORD 기록
ord-ae8e53b0a0634fbb9a3ea5db6a7f720e
출처 데이터셋
uspto-grants-1986_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04574110

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트