홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

HCID 20243492, 화합물 → HCID 13619047, 화합물

HRID 482832
노트
인쇄 미리보기

반응식

HRID 482832 반응식
C([O:8][CH2:9][CH2:10][CH:11]1[NH:14][C:13](=[O:15])[CH:12]1[CH2:16][CH3:17])C1C=CC=CC=1>[Pd].C(O)(=O)C>[CH2:16]([CH:12]1[CH:11]([CH2:10][CH2:9][OH:8])[NH:14][C:13]1=[O:15])[CH3:17]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 1

HCID 20243492HCID 20243492, 화합물

생성물 1

HCID 13619047HCID 13619047, 화합물수율 81.1%

시약·촉매·용매 2

HCID 23938Palladium촉매HCID 176Acetic Acid용매

실험 절차

A 1-l flask connected to a hydrogenation apparatus and placed on on air driven magnetic stirrer is charged with 4-(2-benzyloxyethyl)-3-ethyl-azetidin-2-one (19.5 g), glacial acetic acid (200 ml) trifluoroacetic acid (9.47 ml) and 10% Palladium on carbon (2.9 g). The mixture is hydrogenated at room temperature and pressure for about 3 hours, then the catalyst is removed by filtration under vacuum, washing with acetic acid. The solvent is evaporated under reduced pressure by heating to 40°-50° C. and the obtained residue is dissolved in methanol (150 ml). Anhydrous potassium carbonate (17.27 g) is added to the resulting solution and the obtained mixture is stirred for 30 minutes. The inorganic salts are removed by filtration and the filtrate is brought to pH 6 by the addition of dilute acetic acid. The residue which is obtained by evaporating the solvent is taken up with water (100 ml) and extracted with toluene (three 50-ml portions). The toluene extracts are washed with a small amount of water and then discarded while the mother liquors plus the aqueous washes are combined, saturated with (NH4)2SO4 (100 g) and extracted with ethyl acetate (five 50-ml portions). The organic extracts are dried over Na2SO4 and evaporated to dryness under vacuum yielding 9.7 g of 3-ethyl-4-(2-hydroxyethyl)-azetidin-2-one as a 6:4 cis/trans mixture.

후처리

  1. customA 1-l flask connected to a hydrogenation apparatus
  2. customis hydrogenated at room temperature
  3. customthe catalyst is removed by filtration under vacuum
  4. washwashing with acetic acid
  5. customThe solvent is evaporated under reduced pressure
  6. temperatureby heating to 40°-50° C.
  7. dissolutionthe obtained residue is dissolved in methanol (150 ml)
  8. additionAnhydrous potassium carbonate (17.27 g) is added to the resulting solution
  9. customThe inorganic salts are removed by filtration
  10. additionthe filtrate is brought to pH 6 by the addition of dilute acetic acid
  11. customThe residue which is obtained
  12. customby evaporating the solvent
  13. extractionextracted with toluene (three 50-ml portions)
  14. washThe toluene extracts are washed with a small amount of water
  15. extractionextracted with ethyl acetate (five 50-ml portions)
  16. dry with materialThe organic extracts are dried over Na2SO4
  17. customevaporated to dryness under vacuum

출처 및 근거

ORD 기록
ord-a7ab33a3d1d64211a2e4f40521c3a466
출처 데이터셋
uspto-grants-1986_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US04576746

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트