홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Phenylsilane → N-benzyl-1-phenylethylamine

HRID 486838
인쇄

반응식

HRID 486838 반응식
C([Li])CCC.C1([SiH3])C=CC=CC=1.[CH2:13]([N:20]=[C:21]([C:23]1[CH:28]=[CH:27][CH:26]=[CH:25][CH:24]=1)[CH3:22])[C:14]1[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1>C1COCC1>[CH2:13]([NH:20][CH:21]([C:23]1[CH:28]=[CH:27][CH:26]=[CH:25][CH:24]=1)[CH3:22])[C:14]1[CH:19]=[CH:18][CH:17]=[CH:16][CH:15]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

5

반응물 3

HCID 12752PhenylsilaneHCID 297338N-benzyl-1-phenylethanimineHCID 178418339Butyllithium

생성물 1

HCID 519427N-benzyl-1-phenylethylamine수율 82%

시약·촉매·용매 1

HCID 8028Tetrahydrofuran용매

반응 조건

온도
65 °C

실험 절차

In a dry Schlenk tube under argon was placed (R,R)-Ethylene-1,2-bis(η5 -4,5,6,7-tetrahydroindenyl) titanium (R)-1,1'-binaphth-2,2'-diolate (25 mg, 0.042 mmol) and THF (4 mL). A solution of n-butyllithium (53 μL, 0.084 mmol, 1.6M in hexane) was added and the mixture was stirred for 10 minutes, at which time the color was a dark shade of brown. Phenylsilane (13 μL, 0.105 mmol) was then added and the mixture was stirred for another 10 minutes, the color changing to a darker shade of brown. Acetophenone N-benzyl imine (87 mg, 0.42 mmol) was then added and the reaction vessel was sealed and moved to a dry box. The reaction mixture was transferred to a Parr high pressure reactor, which was sealed and removed from the dry box. The reactor was charged with hydrogen to 1900 psi and heated to 65° C. After stirring for 48 hours the mixture was opened to air and concentrated. The residue was diluted with diethyl ether (20 mL) and extracted with 1N HCl (3×10 mL). The combined aqueous layers were basified with NaOH until strongly basic to pH paper and extracted with diethyl ether (4×25 mL). The organic layers were combined, dried over sodium sulfate and concentrated to produce 82-89% yield of N-benzyl-1-phenylethylamine. The enantiomeric excess (ee), as determined by HPLC analysis of the free amine using a Chiralcel OD column, was 89-92% in favor of the (R)enantiomer.

후처리

  1. customIn a dry Schlenk tube under argon was placed
  2. stirringthe mixture was stirred for another 10 minutes
  3. customthe reaction vessel was sealed
  4. custommoved to a dry box
  5. customwas sealed
  6. customremoved from the dry box
  7. additionThe reactor was charged with hydrogen to 1900 psi
  8. stirringAfter stirring for 48 hours the mixture
  9. concentrationconcentrated
  10. additionThe residue was diluted with diethyl ether (20 mL)
  11. extractionextracted with 1N HCl (3×10 mL)
  12. extractionextracted with diethyl ether (4×25 mL)
  13. dry with materialdried over sodium sulfate
  14. concentrationconcentrated

출처 및 근거

ORD 기록
ord-cfda255c025844d8896fa059b717d532
출처 데이터셋
uspto-grants-1994_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US05292893

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트