홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

3,3,5-Tribromo-1H-pyrrolo[2,3-b]pyridin-2(3H)-one → 5-bromo-1H,2H,3H-pyrrolo(2,3-b)pyridin-2-one

HRID 493145
노트
인쇄 미리보기

반응식

HRID 493145 반응식
Br[C:2]1(Br)[C:10]2[C:5](=[N:6][CH:7]=[C:8]([Br:11])[CH:9]=2)[NH:4][C:3]1=[O:12]>C(O)(=O)C.[Zn]>[Br:11][C:8]1[CH:9]=[C:10]2[CH2:2][C:3](=[O:12])[NH:4][C:5]2=[N:6][CH:7]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 1

HCID 219561923,3,5-Tribromo-1H-pyrrolo[2,3-b]pyridin-2(3H)-one

생성물 1

HCID 155040625-bromo-1H,2H,3H-pyrrolo(2,3-b)pyridin-2-one수율 72%

시약·촉매·용매 2

HCID 23994Zinc촉매HCID 176Acetic Acid용매

반응 조건

온도
22.5 °C

실험 절차

Zinc dust (34.0 g, 0.52 mol) was added in small portion to a stirred suspension of 3 (40.85 g, 0.111 mol) in glacial acetic acid (1000 mL) at such a rate that the temperature was maintained between 20-25° C. (strongly exothermic reaction; external ice bath cooling). Addition took about 20 min. Cooling bath was removed and stirring was continued at r.t. for 2 h. The solid was filtered off, washed with toluene (50 mL) and triturated with CH2Cl2:MeOH=4:1 (2.5 L). The solution was decanted off and treated with 1.0 M aqueous Na2CO3 solution (170 mL). After stirring for 1 h the two layers were separated. The organic layer was washed again with 1.0 M aqueous Na2CO3 solution (50 mL). The combined aqueous layers were extracted with CH2Cl2:MeOH=4:1 (10×100 mL). Combined organic solutions were dried with MgSO4 (200 g) and concentrated. The residual solid was dissolved in THF (2000 mL) and insoluble material was filtered off. The filtrate was concentrated to dryness in vacuum to afford 4 (16.93 g, 72%) as tan solid. 1H NMR (400 MHz, DMSO-d6) δ 3.57 (s, 2H), 7.75 (m, 1H), 8.14 (m, 1H), 11.13 (bs, 1H).

후처리

  1. customstrongly exothermic reaction
  2. temperatureexternal ice bath cooling)
  3. additionAddition
  4. temperatureCooling bath
  5. customwas removed
  6. waitwas continued at r.t. for 2 h
  7. filtrationThe solid was filtered off
  8. washwashed with toluene (50 mL)
  9. customtriturated with CH2Cl2
  10. customThe solution was decanted off
  11. additiontreated with 1.0 M aqueous Na2CO3 solution (170 mL)
  12. stirringAfter stirring for 1 h the two layers
  13. customwere separated
  14. washThe organic layer was washed again with 1.0 M aqueous Na2CO3 solution (50 mL)
  15. extractionThe combined aqueous layers were extracted with CH2Cl2
  16. dry with materialCombined organic solutions were dried with MgSO4 (200 g)
  17. concentrationconcentrated
  18. dissolutionThe residual solid was dissolved in THF (2000 mL)
  19. filtrationinsoluble material was filtered off
  20. concentrationThe filtrate was concentrated to dryness in vacuum

출처 및 근거

ORD 기록
ord-2dd8595f49014122878a6b2c63d40e09
출처 데이터셋
uspto-grants-2009_05
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US07534800B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트