돌아가기
Huagongshe화공사 화학 정보 인쇄 보고서 · 연구 참고용
HRID 496546생성일: 2026년 10월 25일

Allyl Alcohol → 2,2-Difluoro-4-pentenoic acid

https://huagongshe.com/reaction/496546

반응식

참여 물질

역할이름HCID투입량
반응물Allyl AlcoholHCID 7858—
반응물TetrafluoroethyleneHCID 8301—
반응물Sodium hydrideHCID 24758—
반응물Acetone cardiceHCID 18522661—
반응물ButyllithiumHCID 178418339—
용매WaterHCID 962—
용매TetrahydrofuranHCID 8028—
생성물2,2-Difluoro-4-pentenoic acidHCID 11954656—

반응 조건

온도-50 °C

반응 단계

A 250 ml, three-necked flask equipped with a magnetic stir bar, a low-temperature thermometer, a condenser filled with dry ice/acetone, and a balloon is charged with dry THF (100 mL). The flask is cooled to approximately −50° C. and tetrafluoroethylene is passed through a tube of silica and then through a needle into the THF until saturation is reached (as judged by inflation of the balloon). The flask is allowed to warm to −5 to −10° C. which causes the balloon to inflate slightly (most of the gas will be trapped by the condenser). To a separate 50 ml. flask is added NaH (100 mg, 4.2 mmol, 80% suspension in oil), and the oil is removed by repeated washing with dry THF under argon. A solution of previously distilled allyl alcohol (3.0 g 52 mmol) in dry THF (2 ml) is slowly added by syringe with stirring and the mixture is allowed to stir for an additional 10 min. This solution is then transferred dropwise by syringe to the three-necked flask with stirring at −5 to −10° C. After approximately 3 hr, the reaction is checked by GC (60° C.) of a small aliquot and, if needed, additional tetrafluoroethylene is bubbled into the solution for about 5 min. The product elutes just after the allyl alcohol. Further additions of tetrafluoroethylene are usually required. The addition reaction usually requires 6 hr. The reaction is then placed under argon, cooled to −60° C. and n-butyllithium (one equivalent in hexane) is added dropwise over 2 hr. from an addition funnel while the temperature is kept constant at −60° C. The mixture is cooled to −78° C., water (2 ml) is added, the cooling bath is removed and the solution is stirred overnight. The solution is basified with aqueous NaOH and the solvent removed in vacuo. The residue is acidified with 1N HCl and extracted three times with ether. The organic layers are combined and extracted with saturated NaHCO3. The aqueous extract is acidified to pH 1 with HCl and extracted three times with ether. The presence of the difluoro acid is confirmed by NMR of a small aliquot.

출처 및 근거

DOI10.6084/m9.figshare.5104873.v1
특허 번호US06946272B1
출처 데이터셋uspto-grants-2005_09
ORD IDord-e95d49fde8ea4e33b82c952c564325dc
출처 메모uspto-grants-2005_09