홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Toluene → HCID 178500902, 화합물

HRID 50102
인쇄

반응식

HRID 50102 반응식
[C:1]([CH2:6][C:7]([O:9][CH3:10])=[O:8])(=[O:5])[CH:2]([CH3:4])[CH3:3].[F:11][C:12]1[CH:19]=[CH:18][C:15]([C:16]#[N:17])=[CH:14][CH:13]=1.C1(C)C=CC=CC=1.[Sn](Cl)(Cl)(Cl)Cl>CCCCCC>[NH2:17][C:16](=[C:6]([C:1](=[O:5])[CH:2]([CH3:4])[CH3:3])[C:7]([O:9][CH3:10])=[O:8])[C:15]1[CH:18]=[CH:19][C:12]([F:11])=[CH:13][CH:14]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 1140TolueneHCID 145174-FluorobenzonitrileHCID 24287Tin tetrachlorideHCID 2759969Methyl 4-methyl-3-oxopentanoate

생성물 1

HCID 178500902HCID 178500902, 화합물수율 75.2%

시약·촉매·용매 1

HCID 8058Hexane용매

반응 조건

온도
80 °C

실험 절차

75.09 g of methyl isobutyrylacetate (0.50 mol, concentration 96%) and 61.80 g of 4-fluorobenzonitrile (0.50 mol, concentration 98%) were introduced into [500 ml of toluene and treated with 144.7 g of tin tetrachloride (0.55 mol, concentration 99%) at room temperature over the course of 16 min. After half an hour at room temperature, the thick suspension was heated to 80° C. After. 3 h, 175 ml of toluene were distilled off at normal pressure, and the mixture was cooled to room temperature and treated with 450 ml of saturated sodium carbonate and 300 ml of ethyl acetate. The organic phase was separated off and the aqueous phase (after dilution with 300 ml of water) was again extracted with 300 ml of ethyl acetate. After drying the combined organic phases over sodium sulphate, the solvent was removed in vacuo (40° C./25 mbar). 127.2 g of crude product were obtained in the form of a slightly yellowish solid, which was dissolved in 160 ml of n-hexane (slightly turbid solution). After hot filtration and subsequent cooling in an ice bath, 99.8 g of methyl 2-[1-amino-1-(4-fluorophenyl)-methylene]-4-methyl-3-oxopentanoate were obtained after filtration in the form of a pale yellow solid.

후처리

  1. waitAfter half an hour at room temperature
  2. distillation3 h, 175 ml of toluene were distilled off at normal pressure
  3. temperaturethe mixture was cooled to room temperature
  4. additiontreated with 450 ml of saturated sodium carbonate and 300 ml of ethyl acetate
  5. customThe organic phase was separated off
  6. extractionthe aqueous phase (after dilution with 300 ml of water) was again extracted with 300 ml of ethyl acetate
  7. dry with materialAfter drying the combined organic phases over sodium sulphate
  8. customthe solvent was removed in vacuo (40° C./25 mbar)
  9. custom127.2 g of crude product were obtained in the form of a slightly yellowish solid, which
  10. filtrationAfter hot filtration
  11. temperaturesubsequent cooling in an ice bath

출처 및 근거

ORD 기록
ord-1f1b485b281146ec8dd6dd9e597da9cf
출처 데이터셋
uspto-grants-2004_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06710178B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트