홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

2-Bromo-4-nitroanisole → Benzene, 1-methoxy-4-nitro-2-(1,1,2,2,2-pentafluoroethyl)-

HRID 508344
인쇄

반응식

HRID 508344 반응식
Br[C:2]1[CH:7]=[C:6]([N+:8]([O-:10])=[O:9])[CH:5]=[CH:4][C:3]=1[O:11][CH3:12].[F:13][C:14]([F:22])([C:18]([F:21])([F:20])[F:19])C([O-])=O.[Na+]>CN(C=O)C.C1(C)C=CC=CC=1.[Cu]I>[CH3:12][O:11][C:3]1[CH:4]=[CH:5][C:6]([N+:8]([O-:10])=[O:9])=[CH:7][C:2]=1[C:14]([F:22])([F:13])[C:18]([F:21])([F:20])[F:19]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 2

HCID 788702-Bromo-4-nitroanisoleHCID 2733305Sodium pentafluoropropionate

생성물 1

HCID 10730800Benzene, 1-methoxy-4-nitro-2-(1,1,2,2,2-pentafluoroethyl)-

시약·촉매·용매 3

HCID 24350Copper(1+) iodide; Copper(I) iodide; Cuprous iodide; Cuprous iodide (CuI)촉매HCID 1140Toluene용매
HCID 6228
Dimethylformamide
용매

반응 조건

온도
150 °C

실험 절차

To a 250 mL round-bottom flask was added 2-bromo-1-methoxy-4-nitrobenzene (3.5 g, 15.08 mmol), copper(I) iodide (5.75 g, 30.2 mmol), and sodium 2,2,3,3,3-pentafluoropropanoate (5.25 g, 28.2 mmol) in DMF (75 ml) and toluene (25 ml) to give a tan suspension. The mixture was heated at 150° C. and toluene was removed by a Dean-Stark trap. The mixture was heated at 155° C. for 6 h under nitrogen, cooled and poured into 100 mL of water and 100 mL of ether, filtered through a 1-inch plug of Celite and the plug was rinsed with ether. The filtrate layers were separated. The organic layer was washed with brine, dried (Na2SO4) filtered and concentrated. The dark oil was flash chromatographed on an Isco 40 g silica cartridge eluting with 4:1 hexane/EtOAc to give a yellow oil that was a (3:1) mix of desired material and starting material (1.5 g, 37%).

후처리

  1. customto give a tan suspension
  2. customtoluene was removed by a Dean-Stark trap
  3. temperatureThe mixture was heated at 155° C. for 6 h under nitrogen
  4. temperaturecooled
  5. additionpoured into 100 mL of water and 100 mL of ether
  6. filtrationfiltered through a 1-inch plug of Celite
  7. washthe plug was rinsed with ether
  8. customThe filtrate layers were separated
  9. washThe organic layer was washed with brine
  10. dry with materialdried (Na2SO4)
  11. filtrationfiltered
  12. concentrationconcentrated
  13. customchromatographed on an Isco 40 g silica cartridge
  14. washeluting with 4:1 hexane/EtOAc
  15. customto give a yellow oil that
  16. additionmix of desired material

출처 및 근거

ORD 기록
ord-8643760b00ff4365a20fb7274db56b44
출처 데이터셋
uspto-grants-2015_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09095590B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트