홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Acetic Acid → (5-{[6-fluoro-5-(5-methyl-1H-pyrrolo[2,3-b]pyridin-3-ylmethyl)-pyridin-2-ylamino]methyl}-pyrimidin-2-yl)-methyl-amine

HRID 509983
노트
인쇄 미리보기

반응식

HRID 509983 반응식
[F:1][C:2]1[N:7]=[C:6]([NH2:8])[CH:5]=[CH:4][C:3]=1[CH2:9][C:10]1[C:18]2[C:13](=[N:14][CH:15]=[C:16]([CH3:19])[CH:17]=2)[NH:12][CH:11]=1.[CH3:20][NH:21][C:22]1[N:27]=[CH:26][C:25]([CH:28]=O)=[CH:24][N:23]=1.C(O)(=O)C.C([BH3-])#N>C(O)C>[F:1][C:2]1[N:7]=[C:6]([NH:8][CH2:28][C:25]2[CH:24]=[N:23][C:22]([NH:21][CH3:20])=[N:27][CH:26]=2)[CH:5]=[CH:4][C:3]=1[CH2:9][C:10]1[C:18]2[C:13](=[N:14][CH:15]=[C:16]([CH3:19])[CH:17]=2)[NH:12][CH:11]=1
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 176Acetic AcidHCID 498716Cyano-borohydrideHCID 31609752-(Methylamino)pyrimidine-5-carbaldehydeHCID 582592126-fluoro-5-(5-methyl-1H-pyrrolo[2,3-b]pyridin-3-ylmethyl)-pyridin-2-ylamine

생성물 1

HCID 67201595(5-{[6-fluoro-5-(5-methyl-1H-pyrrolo[2,3-b]pyridin-3-ylmethyl)-pyridin-2-ylamino]methyl}-pyrimidin-2-yl)-methyl-amine

시약·촉매·용매 1

HCID 702Ethanol용매

실험 절차

In a 2 mL microwave vial, 6-fluoro-5-(5-methyl-1H-pyrrolo[2,3-b]pyridin-3-ylmethyl)-pyridin-2-ylamine (137, 9.72 mg, 0.04 mmol) and 2-methylamino-pyrimidine-5-carbaldehyde (138, 11.0 mg, 0.08 mmol) were dissolved in 600 μL of 95:5 ethanol:acetic acid, and silica supported cyanoborohydride (50 mg, 1 mmol/g, 0.05 mmol) was added. The reaction was irradiated for 10 minutes at 160° C. in a microwave. The vial was centrifuged to condense the silica and the supernatant was removed by pipette into another vial. The residual silica was rinsed with 500 μL of ethanol, centrifuged and the supernatant added to the first supernatant. The solvents were removed under vacuum and the resulting material dissolved in 400 μL of dimethyl sulfoxide for purification by HPLC. Samples were purified on Phenomenex C18 column (50 mm×10 mm ID) with mobile phase A of 0.1% trifluoroacetic acid in water, mobile phase B of 0.1% trifluoroacetic acid in acetonitrile, 20-100% B over 16 minutes at a flow rate of 6 mL/min. Appropriate fractions were collected and solvents removed under vacuum to provide the desired compound. MS (ESI) [M+H+]+=378.3.

후처리

  1. additionwas added
  2. customThe reaction was irradiated for 10 minutes at 160° C. in a microwave
  3. customThe vial was centrifuged to condense the silica
  4. customthe supernatant was removed by pipette into another vial
  5. washThe residual silica was rinsed with 500 μL of ethanol
  6. additioncentrifuged and the supernatant added to the first supernatant
  7. customThe solvents were removed under vacuum
  8. dissolutionthe resulting material dissolved in 400 μL of dimethyl sulfoxide for purification by HPLC
  9. customSamples were purified on Phenomenex C18 column (50 mm×10 mm ID) with mobile phase A of 0.1% trifluoroacetic acid in water, mobile phase B of 0.1% trifluoroacetic acid in acetonitrile, 20-100% B over 16 minutes at a flow rate of 6 mL/min
  10. customAppropriate fractions were collected
  11. customsolvents removed under vacuum

출처 및 근거

ORD 기록
ord-8ec53f5a2664403ca049fcb19dd37308
출처 데이터셋
uspto-grants-2015_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09096593B2

반응 노트

불러오는 중…

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트