홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Methanol → (2,3-Dimethoxyphenyl)(piperidin-4-yl)methanol

HRID 51264
인쇄

반응식

HRID 51264 반응식
[OH:1][CH:2]([C:13]1[CH:18]=[CH:17][N:16]=[CH:15][CH:14]=1)[C:3]1[CH:8]=[CH:7][CH:6]=[C:5]([O:9][CH3:10])[C:4]=1[O:11][CH3:12].C1(C)C=CC=CC=1.CO.[H][H]>[Rh].C(O)(=O)C>[OH:1][CH:2]([CH:13]1[CH2:14][CH2:15][NH:16][CH2:17][CH2:18]1)[C:3]1[CH:8]=[CH:7][CH:6]=[C:5]([O:9][CH3:10])[C:4]=1[O:11][CH3:12]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 887MethanolHCID 1140TolueneHCID 314742(2,3-Dimethoxyphenyl)(4-pyridinyl)methanolHCID 178418361HCID 178418361, 화합물

생성물 1

HCID 10890362(2,3-Dimethoxyphenyl)(piperidin-4-yl)methanol수율 96%

시약·촉매·용매 2

HCID 23948Rhodium
촉매
HCID 176Acetic Acid용매

실험 절차

Into a suitable inerted reactor was charged 118 kg (481 mol) of 4-[1-hydroxy-1-(2,3-dimethoxyphenyl)methyl]pyridine (10) as a toluene wet cake and 23.6 kg of 5% rhodium on carbon catalyst at 25° C. To the slurry was then added 850 kg of methanol and 29 kg of glacial acetic acid. The reactor was then pressurized to about 100 psi with hydrogen for about 4-12 hours1 at 40° C. The catalyst was removed by filtration and the reactor and the catalyst were rinsed with 150 kg of methanol.2 The reactor rinse filtrate and the reaction mixture filtrate were combined. The concentration of 4-[1-hydroxy-1-(2,3-dimethoxyphenyl)methyl]piperidine (11) is typically about 10 wt %, affording about 116 kg of 4-[1-hydroxy-1-(2,3-dimethoxyphenyl)methyl]piperidine (11) (96% yield)3.

후처리

  1. customThe catalyst was removed by filtration
  2. washthe reactor and the catalyst were rinsed with 150 kg of methanol
  3. wash2 The reactor rinse filtrate

출처 및 근거

ORD 기록
ord-618235ac678c43d9af7c7634e866b26b
출처 데이터셋
uspto-grants-2004_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06713627B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트