홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Veratrole → N-Boc-(2,3-dimethoxyphenyl)-4-piperidinylmethanone

HRID 51270
인쇄

반응식

HRID 51270 반응식
[Li]CCCC.[C:6]1([O:14][CH3:15])[C:7](=[CH:10][CH:11]=[CH:12][CH:13]=1)[O:8][CH3:9].COCN[C:20]([CH:22]1[CH2:27][CH2:26][N:25]([C:28]([O:30][C:31]([CH3:34])([CH3:33])[CH3:32])=[O:29])[CH2:24][CH2:23]1)=[O:21]>CCCCCC.O1CCCC1>[CH3:9][O:8][C:7]1[C:6]([O:14][CH3:15])=[CH:13][CH:12]=[CH:11][C:10]=1[C:20]([CH:22]1[CH2:27][CH2:26][N:25]([C:28]([O:30][C:31]([CH3:34])([CH3:33])[CH3:32])=[O:29])[CH2:24][CH2:23]1)=[O:21]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 3

HCID 7043VeratroleHCID 442032024-(Methoxymethylcarbamoyl)piperidine-1-carboxylic acid tert-butyl esterHCID 178418339Butyllithium

생성물 1

HCID 46780868N-Boc-(2,3-dimethoxyphenyl)-4-piperidinylmethanone

시약·촉매·용매 2

HCID 8028Tetrahydrofuran용매2회
HCID 8058
Hexane
용매

반응 조건

온도
0 °C

실험 절차

A solution of n-BuLi (2.5M, 452 mL) in hexane was added to a solution of veratrole (149 g, 1.08 mol) in anhydrous tetrahydrofuran (1.2 L) over 10 minutes at −78° C. under nitrogen. The resulting solution was stirred at 0° C. for 1 hour and room temperature for 4 hours. A solution of 4-[(methoxymethylamino)carbonyl]-1-piperidinecarboxylic acid, 1,1-dimethylethyl ester (15) (275 g, 1.01 mol) in tetrahydrofuran (800 mL) was added to the reaction slurry at −65° C. over 20 minutes. The mixture was warmed to room temperature, stirred for 18 hours and quenched with saturated ammonium chloride (1 L). After stirring for 1 hour, the phases were separated and the aqueous layer was extracted with ethyl ether (1 L). The combined organic solutions were washed with brine (2 L) and dried (MgSO4). The mixture was filtered and the filtrate was concentrated (30° C./20 torr) to a residue (413 g). The solution may be used directly in Scheme L, step a, Example 108.

후처리

  1. temperatureThe mixture was warmed to room temperature
  2. stirringstirred for 18 hours
  3. customquenched with saturated ammonium chloride (1 L)
  4. stirringAfter stirring for 1 hour
  5. customthe phases were separated
  6. extractionthe aqueous layer was extracted with ethyl ether (1 L)
  7. washThe combined organic solutions were washed with brine (2 L)
  8. dry with materialdried (MgSO4)
  9. filtrationThe mixture was filtered
  10. concentrationthe filtrate was concentrated (30° C./20 torr) to a residue (413 g)

출처 및 근거

ORD 기록
ord-74e44df03d06443bac63a75ca0bbbe91
출처 데이터셋
uspto-grants-2004_03
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US06713627B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트