Dichloromethane → HCID 86705000, 화합물

A 22 L 4 neck round bottom flask was charged with (R)-N-((R)-1-(3-cyano-5-fluorophenyl)but-3-enyl)-2-methylpropane-2-sulfinamide (I-18) (441 g, 1.5 mol) and DCM (6 L). The solution was cooled to <0° C. and mCPBA (737 g, 3.0 mol) was added in portions over 60 minutes at a batch temperature <10° C. (Note: a mild exotherm and gas evolution were observed. A white suspension was obtained after the addition). The reaction mixture was stirred at 0-10° C. over 20 minutes and warmed to room temperature and stirred at room temperature for 3 hours. Additional mCPBA (387.5 g, 1.54 mol) was added and the mixture was stirred at room temperature for an additional 18 hours. The reaction was monitored by HPLC until deemed complete. The mixture was cooled to <10° C. and water (7.3 L) was added to the reaction mixture. (Note: exotherm from 5° C. to 12° C.) A saturated K2CO3 solution (1.94 L) was added until pH˜9.0 was reached. (Note: A suspension was initially obtained and a biphasic solution was obtained after stirring). The DCM layer was separated and to it was added 10% sodium bisulfite solution (2.9 L) over 15 minutes at 4 to 9° C. (aqueous layer pH 3-4). The mixture was stirred 30 minutes at 9 to 12° C. and the DCM layer was then washed with a mixture of brine (3 L) and aqueous saturated NaHCO3 (2 L) (aqueous layer pH=7). Aqueous saturated K2CO3 (150 mL) was added until pH=8.5 at 10 to 16° C. The DCM solution was concentrated under vacuum (250 to 50 torr) at 25° C. to give N-((1R)-1-(3-cyano-5-fluorophenyl)-2-(oxiran-2-yl)ethyl)-2-methylpropane-2-sulfonamide (I-19) as an oil (as a mixture of diastereoisomers). 1H NMR (400 MHz, CDCl3) δ 748-7.50 (m, 1 H), 7.30-7.40 (m, 1 H), 7.28-7.29 (m, 1 H), 5.28-5.37 (m, 1 H), 4.77-4.88 (m, 1 H), 2.89-3.00 (m, 1 H), 2.79-2.85 (m, 1 H), 2.48-2.62 (m, 1 H), 2.21-2.31 (m, 1 H), 1.86-1.84 (m, 1 H), 1.36 (s, 9 H).

1. temperatureThe solution was cooled to <0° C.
2. customA white suspension was obtained
3. additionafter the addition)
4. temperaturewarmed to room temperature
5. stirringstirred at room temperature for 3 hours
6. stirringthe mixture was stirred at room temperature for an additional 18 hours
7. temperatureThe mixture was cooled to <10° C.
8. custom(Note: A suspension was initially obtained
9. customa biphasic solution was obtained
10. stirringafter stirring)
11. customThe DCM layer was separated and to it
12. additionwas added 10% sodium bisulfite solution (2.9 L) over 15 minutes at 4 to 9° C. (aqueous layer pH 3-4)
13. stirringThe mixture was stirred 30 minutes at 9 to 12° C.
14. washthe DCM layer was then washed with a mixture of brine (3 L) and aqueous saturated NaHCO3 (2 L) (aqueous layer pH=7)
15. additionAqueous saturated K2CO3 (150 mL) was added until pH=8.5 at 10 to 16° C
16. concentrationThe DCM solution was concentrated under vacuum (250 to 50 torr) at 25° C.

ORD 기록

ord-4fbc636c403843ef9d649670117f67c8

출처 데이터셋

uspto-grants-2015_08

DOI

10.6084/m9.figshare.5104873.v1

특허 번호

US09102671B2