홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

1-Octene → 1-Octene t-butylstyrene divinylbenzene

HRID 516195
인쇄

반응식

HRID 516195 반응식
[CH2:1]=[CH:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH3:8].[C:9]([CH:13]=[CH:14][C:15]1[CH:20]=[CH:19][CH:18]=[CH:17][CH:16]=1)([CH3:12])([CH3:11])[CH3:10]>C1(C)C=CC=CC=1>[CH2:1]=[CH:2][CH2:3][CH2:4][CH2:5][CH2:6][CH2:7][CH3:8].[C:9]([CH:13]=[CH:14][C:15]1[CH:16]=[CH:17][CH:18]=[CH:19][CH:20]=1)([CH3:12])([CH3:10])[CH3:11].[CH:2]([C:3]1[CH:8]=[CH:7][CH:6]=[CH:5][C:4]=1[CH:9]=[CH2:10])=[CH2:1]
참가 물질실험 절차후처리출처 및 근거반응 노트

참가 물질

4

반응물 2

HCID 81251-OcteneHCID 138033tert-Butylstyrene

생성물 1

HCID 866624871-Octene t-butylstyrene divinylbenzene

시약·촉매·용매 1

HCID 1140Toluene용매

실험 절차

The polymerization reaction was conducted in a 300 ml stainless autoclave equipped with a mechanical stirrer. In an argon filled dry-box, the reactor was charged with 50 ml of toluene, 0.2 ml of DVB, and various volume ratios of 1-octene and tert-butylstyrene (Oct/BSt=7/3, 6/4, 5/5, 6/4, and 7/3 ml). The reactor was then sealed and then moved from the dry box and purged with nitrogen gas at 30° C. About 0.101 g of TiCl3(AA) and 1 ml of AlCl2Et in 10 ml of toluene, after mixing for 20 minutes by stirring, were introduced to the reactor under nitrogen pressure to initiate the polymerization. After about 1 hour, the reaction was terminated by adding 100 ml of dilute HCl solution in methanol to the reactor. The 1-octene/t-butylstyrene/divinylbenzene terpolymers were isolated by filtration and washed completely with methanol and dried under vacuum for about 8 hours. The resulting terpolymers were completely soluble in common organic solvents, including toluene and decalin. Before absorption measurement, the resulting terpolymers were divided into ½ inch sized particles and heated in an oven at about 220° C. for about 2 hours to obtain fully cross-linked samples. Table 3 provides absorption capacity data for the samples in toluene after 5 hours and 16 hours.

후처리

  1. customThe polymerization reaction
  2. customequipped with a mechanical stirrer
  3. customThe reactor was then sealed
  4. custompurged with nitrogen gas at 30° C
  5. additionAbout 0.101 g of TiCl3(AA) and 1 ml of AlCl2Et in 10 ml of toluene, after mixing for 20 minutes
  6. additionwere introduced to the reactor under nitrogen pressure
  7. customthe polymerization
  8. customthe reaction was terminated
  9. additionby adding 100 ml of dilute HCl solution in methanol to the reactor

출처 및 근거

ORD 기록
ord-436597a392bb4bc08ca9aa3a8b13d267
출처 데이터셋
uspto-grants-2015_08
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US09109057B2

반응 노트

이 페이지에서참가 물질실험 절차후처리출처 및 근거반응 노트