홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Toluene → Methylthioxanthone

HRID 533494
인쇄

반응식

HRID 533494 반응식
[C:1](S)(=S)[C:2]1[C:3](=[CH:5][CH:6]=[CH:7][CH:8]=1)O.C1(C)C=CC=CC=1.CC1C=CC2[S:29][C:28]3[C:23](=[CH:24][CH:25]=[CH:26][CH:27]=3)[C:22](=[O:33])C=2C=1.CC1C=CC2C(=O)C3C(SC=2C=1)=CC=CC=3>S(=O)(=O)(O)O.O>[CH3:1][C:2]1[C:3]2[C:22](=[O:33])[C:23]3[C:28](=[CH:27][CH:26]=[CH:25][CH:24]=3)[S:29][C:5]=2[CH:6]=[CH:7][CH:8]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 1140TolueneHCID 274792-MethylthioxanthoneHCID 682432-Hydroxydithiobenzoic acidHCID 3751033-Methylthioxanthone

생성물 1

HCID 15566316Methylthioxanthone

시약·촉매·용매 2

HCID 962Water용매
HCID 1118
Sulfuric Acid
용매

반응 조건

온도
25 °C

실험 절차

Dithiosalicylic acid [product of Wako Pure Chemical Industries, Ltd.] (10 parts) was dissolved in sulfuric acid (139 parts), and the solution was stirred at room temperature (about 25° C.) for one hour and then cooled in an ice bath. Toluene (25 parts) was added dropwise in small portions to the cooled solution, while the temperature of the cooled solution was controlled to 20° C. or lower. Thereafter, the temperature was recovered to room temperature (about 25° C.), and the solution was further stirred for two hours. The resulting reaction mixture was added in small portions to water (815 parts), and precipitated yellow solids were filtered. The yellow solids were dissolved in dichloromethane (260 parts). To the resulting solution, water (150 parts) was added, and then 24% KOH aqueous solution (6.7 parts) was added to alkalinize the aqueous phase. After stirring the resulting mixture for one hour, the aqueous phase was removed by a separation operation, and the organic phase was washed with water (130 parts) three times. Then, the organic phase was dried over anhydrous sodium sulfate, and the organic solvent was evaporated under reduced pressure. As a result, 8.7 parts of an intermediate (C122-2-1) was obtained (as yellow solids). The intermediate (C122-2-1) was a mixture of 2-methylthioxanthone and 3-methylthioxanthone.

후처리

  1. temperaturecooled in an ice bath
  2. customwas controlled to 20° C.
  3. customThereafter, the temperature was recovered to room temperature (about 25° C.)
  4. stirringthe solution was further stirred for two hours
  5. customThe resulting reaction mixture
  6. customprecipitated yellow solids
  7. filtrationwere filtered
  8. dissolutionThe yellow solids were dissolved in dichloromethane (260 parts)
  9. additionTo the resulting solution, water (150 parts) was added
  10. addition24% KOH aqueous solution (6.7 parts) was added
  11. stirringAfter stirring the resulting mixture for one hour
  12. customthe aqueous phase was removed by a separation operation
  13. washthe organic phase was washed with water (130 parts) three times
  14. dry with materialThen, the organic phase was dried over anhydrous sodium sulfate
  15. customthe organic solvent was evaporated under reduced pressure
  16. customAs a result, 8.7 parts of an intermediate (C122-2-1) was obtained (as yellow solids)

출처 및 근거

ORD 기록
ord-2deb2de5dc784fb18db824102e097e46
출처 데이터셋
uspto-grants-2014_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08853290B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트