홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.0
  1. 홈
  2. /반응

Carbon Dioxide → (2S,5R)-1-allyl-2,5-dimethylpiperazine

HRID 538256
노트
인쇄 미리보기

반응식

HRID 538256 반응식
[CH2:1]([N:4]1[C@H:9]([CH3:10])[CH2:8][N:7](C(OCC)=O)[C@@H:6]([CH3:16])[CH2:5]1)[CH:2]=[CH2:3].[OH-].[K+].C(=O)=O.C1(C)C=CC=CC=1>C(O)C>[CH2:1]([N:4]1[CH2:5][C@@H:6]([CH3:16])[NH:7][CH2:8][C@@H:9]1[CH3:10])[CH:2]=[CH2:3]
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

6

반응물 4

HCID 280Carbon DioxideHCID 1140TolueneHCID 14797Potassium HydroxideHCID 10823138Ethyl trans-4-allyl-2,5-dimethyl-1-piperazinecarboxylate

생성물 1

HCID 11291191(2S,5R)-1-allyl-2,5-dimethylpiperazine수율 69%

시약·촉매·용매 1

HCID 702Ethanol
용매

반응 조건

온도
100 °C

실험 절차

Ethyl trans-4-allyl-2,5-dimethyl-1-piperazinecarboxylate (630 g, 2.78 mol) was added to a solution of 87% potassium hydroxide pellets (2970 g, 46 mol) in 4300 mL of 95% ethanol and heated at reflux for 1.5 hours. Carbon dioxide evolution was observed for the first 0.5-1 hour of heating. The reaction was cooled below reflux temperature and 2000 mL of toluene was carefully added. Ethanol was removed by azeotropic distillation at 105° C., while adding an additional 4000 mL of toluene to the reaction flask during the course of the distillation. After collection of 9000 mL of distillate, the reaction was cooled to 100° C. and 1000 mL of toluene was carefully added. The solution was slowly cooled to 5° C. and maintained at 5 C for 30 minutes. The solution was filtered, and the filter cake was washed with an additional 1500 mL of toluene. The filtrate was washed with 1000 mL of water, dried over magnesium sulfate, and the solvent was removed to give 296 g (69%) of trans-1-allyl-2,5-dimethylpiperazine as a dark liquid. NMR (300 MHz, DMSO-d6): δ 0.87 (d, J=6.3 Hz, 3H); 0.92 (d, J=6.3 Hz, 3H); 1.63 (t, J=11 Hz, 1H); 2.05 (m, 1H); 2.30 (t, J=11 Hz, 1H); 2.6-2.8 (m, 4H); 3.33 (dd, J1=5 Hz, J2=14 Hz, 1H); 5.09 (d, J=8.7 Hz, 1H); 5.13 (d, J=14 Hz, 1H) 5.8 (m, 1H).

후처리

  1. temperatureheated
  2. temperatureat reflux for 1.5 hours
  3. customwas observed for the first 0.5-1 hour
  4. temperatureof heating
  5. temperatureThe reaction was cooled
  6. additionwas carefully added
  7. customEthanol was removed by azeotropic distillation at 105° C.
  8. additionwhile adding an additional 4000 mL of toluene to the reaction flask
  9. distillationduring the course of the distillation
  10. distillationAfter collection of 9000 mL of distillate
  11. addition1000 mL of toluene was carefully added
  12. temperatureThe solution was slowly cooled to 5° C.
  13. temperaturemaintained at 5 C for 30 minutes
  14. filtrationThe solution was filtered
  15. washthe filter cake was washed with an additional 1500 mL of toluene
  16. washThe filtrate was washed with 1000 mL of water
  17. dry with materialdried over magnesium sulfate
  18. customthe solvent was removed

출처 및 근거

ORD 기록
ord-c0a9519371d340e7893a7db35723d440
출처 데이터셋
uspto-grants-2014_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08865721B2

반응 노트

불러오는 중…

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트