홈MCP워크벤치Skills
홈워크벤치알림마이페이지
llms.txt · MCP 가이드개인정보처리방침 · 이용약관 · 지원v1.8.3
  1. 홈
  2. /반응

Formaldehyde → Vandetanib

HRID 538906
인쇄

반응식

HRID 538906 반응식
[Br:1][C:2]1[CH:20]=[CH:19][C:5]([NH:6][C:7]2[C:16]3[C:11](=[CH:12][CH:13]=[C:14]([O:17][CH3:18])[CH:15]=3)[N:10]=[CH:9][N:8]=2)=[C:4]([F:21])[CH:3]=1.C=O.[OH-].[K+].[O:26]1[CH2:30][CH2:29][CH2:28][CH2:27]1>O.C(O)=O>[Br:1][C:2]1[CH:20]=[CH:19][C:5]([NH:6][C:7]2[C:16]3[C:11](=[CH:12][C:13]([O:26][CH2:30][CH:29]4[CH2:4][CH2:5][N:6]([CH3:7])[CH2:27][CH2:28]4)=[C:14]([O:17][CH3:18])[CH:15]=3)[N:10]=[CH:9][N:8]=2)=[C:4]([F:21])[CH:3]=1
참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트

참가 물질

7

반응물 4

HCID 712FormaldehydeHCID 8028TetrahydrofuranHCID 14797Potassium HydroxideHCID 866333394-(4-Bromo-2-fluoroanilino)-6-methoxyquinazoline

생성물 1

HCID 3081361Vandetanib

시약·촉매·용매 2

HCID 284Formic Acid용매
HCID 962
Water
용매
2회

반응 조건

온도
81 °C

실험 절차

7-(1-tert-butoxycarbonyl)piperidine-4-ylmethoxy)-4-(4-bromo-2-fluoroanilino)-6-methoxyquinazoline (40 g), water (16 ml), formic acid (43 ml) and aqueous formaldehyde (37% w/w, 33 ml) were added to a vessel equipped with overhead stirrer, reflux condenser and thermometer. The reaction mixture was heated to 81° C. and stirred at this temperature for 5 hours. The reaction mixture was cooled to 60° C. and tetrahydrofuran (178 ml) was added. The temperature of the reaction mixture was adjusted to 40° C. and potassium hydroxide (49% w/w, 84 ml) was added, followed by water (22 ml). The aqueous phase was separated and discarded. The organic phase was adjusted to 60° C. and water (107 ml) and butyl acetate (107 ml) were added. The aqueous phase was separated and discarded. The organic phase was filtered, following through with tetrahydrofuran (18 ml) wash. The temperature of the filtrates was adjusted to 60° C. and butyl acetate (107 ml) was added. The reaction mixture was set for distillation at ambient pressure. The distillation was stopped when the contents temperature reached 106° C. The slurry was cooled to 65° C. and tetrahydrofuran (107 ml) was added. The slurry was cooled to 0-5° C. and held for 1 hour before isolating the product by filtration. The product was washed with ethyl acetate (72 ml) and dried at 50° C. Yield: 24.82 g, 80.3%.

후처리

  1. customequipped with overhead stirrer
  2. temperaturereflux condenser
  3. temperatureThe reaction mixture was cooled to 60° C.
  4. customwas adjusted to 40° C.
  5. customThe aqueous phase was separated
  6. customwas adjusted to 60° C.
  7. additionwater (107 ml) and butyl acetate (107 ml) were added
  8. customThe aqueous phase was separated
  9. filtrationThe organic phase was filtered
  10. washwash
  11. customwas adjusted to 60° C.
  12. additionbutyl acetate (107 ml) was added
  13. distillationThe reaction mixture was set for distillation at ambient pressure
  14. distillationThe distillation
  15. customreached 106° C
  16. temperatureThe slurry was cooled to 65° C.
  17. additiontetrahydrofuran (107 ml) was added
  18. temperatureThe slurry was cooled to 0-5° C.
  19. waitheld for 1 hour
  20. custombefore isolating the product
  21. filtrationby filtration
  22. washThe product was washed with ethyl acetate (72 ml)
  23. customdried at 50° C

출처 및 근거

ORD 기록
ord-8ce5b1fe291c41b5b2d47387804b7a43
출처 데이터셋
uspto-grants-2014_10
DOI
10.6084/m9.figshare.5104873.v1
특허 번호
US08865899B2

반응 노트

이 페이지에서참가 물질반응 조건실험 절차후처리출처 및 근거반응 노트